They operate in a ping-pong manner. The Storq plays the music programming and Rivendell plays the local traffic log. Each passes control back and fourth to each other.
Rivendell also acts as the full music system for the morning show in LiveAssist mode. To allow for that, I have a macro that disables the GPI from the Storq. -- Brian P. McGlynn Sent from my iPhone On 2012-05-30, at 4:25 PM, James Gamblin <jgamb...@lwrn.org> wrote: > Awesome Brian P.. > > Is Revendell your main system, controlling STORQ or vice versa? > > I definately need macro info. > > Thanks, > James Gamblin > > ...sorry, looks like you have @ least 2 of us firing at you here. > We are both @ the same location. > > > > On Wed, May 30, 2012 at 5:52 PM, Brian P. McGlynn <jazz...@yahoo.ca> wrote: > Absolutely. I'll need to scan it next week when I get back to the station. > > I'll also share the macros and config I used to handle the start/stop/live > assist of the Storq as you will need that as well. There were some tweaks to > do in order to get it to work. > > Brian > > -- > Brian P. McGlynn > Sent from my iPhone > > On 2012-05-30, at 11:31 AM, Brian Saum <bs...@lwrn.org> wrote: > >> Would you be willing to share your wiring diagram because we are in a >> similar situation trying to connect Storq with Rivendell. >> >> In His Service, >> >> Brian Saum >> I/T Director, World Radio Network >> Office: 956.787.9788 >> Fax: 956.787.9783 >> >> >> >> On Wed, May 30, 2012 at 12:46 PM, Brian P. McGlynn <jazz...@yahoo.ca> wrote: >> I had to use two GPIO cards. The PDISO-08 for the send relay an the >> PDISO-24 for the receiver. >> >> The PDISO-08 has relays a d opto-couplers, but the opto couplers need to be >> lit by a voltage present whereas the PDISO-24 with pull-up resistors works >> well to sense when a relay contact closes. >> >> We're using a Storq as the external system, and this seems to work well. >> >> (note: I am mobile, so the model numbers may be off). >> >> Brian >> >> -- >> Brian P. McGlynn >> Sent from my iPhone >> >> On 2012-05-30, at 12:01 PM, James Gamblin <jgamb...@lwrn.org> wrote: >> >> > Hi all, >> > >> > Looking for a good solution. We are wanting to connect Rivendell with >> > another system. >> > >> > I am looking for a recommendation for a GPIO card that has 1 input and 1 >> > output and works >> > with SUSE. >> > >> > Thanks, >> > James Gamblin >> > _______________________________________________ >> > Rivendell-dev mailing list >> > Rivendell-dev@lists.rivendellaudio.org >> > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >> _______________________________________________ >> Rivendell-dev mailing list >> Rivendell-dev@lists.rivendellaudio.org >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >> >> _______________________________________________ >> Rivendell-dev mailing list >> Rivendell-dev@lists.rivendellaudio.org >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > > _______________________________________________ > Rivendell-dev mailing list > Rivendell-dev@lists.rivendellaudio.org > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > > > _______________________________________________ > Rivendell-dev mailing list > Rivendell-dev@lists.rivendellaudio.org > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
_______________________________________________ Rivendell-dev mailing list Rivendell-dev@lists.rivendellaudio.org http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
