Have the same problem. Having both fader on. But i habe touchscreen without using GPIO...
Why not have a checkbox in rdadmin/rddairplay "Use only last running player when activating automaticmode"..? Thats possible.? Am 06.12.2012 01:31, schrieb Wayne Merricks: > Hi, > > Thats a possibility but it will probably confuse the presenters, handing off > to the main log and log generation seems to get messy as well. > > I need to put some thought into it I guess. > > Cheers for the ideas, > > Wayne > > -----Original Message----- > From: rivendell-dev-boun...@lists.rivendellaudio.org on behalf of Geoff > Barkman > Sent: Thu 06/12/2012 00:15 > To: User discussion about the Rivendell Radio Automation System > Subject: Re: [RDD] Automatic Mode Output Switching > > Hi Wayne > I'm not sure if this is exactly what you want? But if you want to have > something playing out of only one fader... have you thought of using > the Aux Log 1 or 2. You could set it to play out through one soundcard > and triggering the macro starts Aux Log playing for overnight... or > whatever. > > On Thu, Dec 6, 2012 at 12:23 PM, Wayne Merricks > <waynemerri...@thevoiceasia.com> wrote: >> Hi all, >> >> Its probably my own stupidity but I'm wondering how best to handle the fact >> that in Automatic mode Rivendell cycles your sound card outputs. >> >> Hopefully I can explain this better with an example. >> >> I have 2 Faders set up with GPIO macros. When Fader 1 is live, it triggers >> a play next on Output 1 (PN 1 1 1!). Fader 2 = PN Output 2 (PN 1 2 1!). >> >> This is all well and good until you get towards the end of the broadcast day >> (or any section where you want automatic mode for any length of time). >> >> As a presenter I finish off my link, "hope you enjoyed the show up next is >> the greatest song of all time for your enjoyment, Rebecca Black - Friday" >> >> Then I lift Fader one and turn it on which triggers my play out on Fader >> one. >> >> I finish it off by selecting Automatic and close the studio down to go home. >> >> The excellent Rebecca Black finishes several bliss filled minutes later and >> The Firm Star Trekkin' automatically starts but Rivendell picks Output 2 to >> play this on which still has its fader down and off. >> >> But the screams of "just turn the fader on when you leave you ignorant >> English luddite" causes problems when you have GPIO on fader starts. To get >> automation to work properly, I need to lift Fader 1 and hit on so that >> Rebecca Black starts (but leave it low level enough that nobody can hear >> it). Select Automatic mode, then tell my awesome listener that I hope they >> enjoyed the show and that I'll leave them with The Firm Star Trekkin. >> >> With that playing automatic mode will cut out the glorious vocal stylings of >> our lovely Rebecca and I can lift the fader to the normal 0 db level ready >> for a night of automated play out. >> >> So thats my long winded way of saying, is there a way of making automatic >> mode only use the first play out from the sound card? Or is there a better >> macro to use than just PN? (I tried setting Airplay to only use sound card >> output 0 but that prevented my macro from forcing output 1, it just played >> on 0 each time). >> >> Any info would be appreciated (but I get the impression I need to tweak the >> code), >> >> Wayne >> >> ________________________________ >> Scanned by MailMarshal >> ________________________________ >> >> ________________________________ >> Attention: >> >> The information contained in this message is confidential and intended for >> the addressee(s) only. If you have received this message in error or there >> are any problems, please notify the originator immediately. The >> >> unauthorised use, disclosure, copying or alteration of this message is >> strictly forbidden. Christian Vision or any of its subsidiaries will not be >> liable for direct, special, indirect or consequential damages arising from >> alteration of the contents of this message by a third party or as a result >> of any virus being passed on. Please note that we reserve the right to >> monitor and read any e-mails sent or received by the company under the >> Telecommunications (Lawful Business Practice) (Interception of >> Communications) Regulation 2000. Christian Vision is registered in England >> as a limited company 2842414 and >> >> as a charity 1031031 >> ________________________________ >> >> _______________________________________________ >> Rivendell-dev mailing list >> Rivendell-dev@lists.rivendellaudio.org >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >> > _______________________________________________ > Rivendell-dev mailing list > Rivendell-dev@lists.rivendellaudio.org > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > > > ####################### > Scanned by MailMarshal > ####################### > > ############ > > Attention: > > The information contained in this message is confidential and intended > for the addressee(s) only. If you have received this message in error > or there are any problems, please notify the originator immediately. > The unauthorised use, disclosure, copying or alteration of this message > is strictly forbidden. Christian Vision or any of its subsidiaries will > not be liable for direct, special, indirect or consequential damages > arising from alteration of the contents of this message by a third party > or as a result of any virus being passed on. Please note that we reserve > the right to monitor and read any e-mails sent or received by the > company under the Telecommunications (Lawful Business Practice) > (Interception of Communications) Regulation 2000. Christian Vision is > registered in England as a limited company 2842414 and as a charity > 1031031 > > ############ > > > > _______________________________________________ > Rivendell-dev mailing list > Rivendell-dev@lists.rivendellaudio.org > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > -- -- Ruediger Radio Ostfriesland Techniksupport Automation _______________________________________________ Rivendell-dev mailing list Rivendell-dev@lists.rivendellaudio.org http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
