A somewhat remote possibility: Are you using DHCP? If so, is it possible that your new modem/router is assigning addresses in a different range than your old router?
++hobbitt On Fri, Aug 21, 2015 at 4:13 PM Steve Atkins <lu...@comcast.net> wrote: > The cable guy came this week to replace a bad modem (the new device > seems more interested in ipv6 addressing). Probably neither here nor > there, but had to do some extra config stuff for the static ip address > on the Rivendell box. In order to get it to connect, I had to change > the gateway address on the modem to the same ipv4 address it had been on > the old modem/router. Now, not using my router, just the cable modem. > > Finally got connected again, but now I notice I can't assign markers to > files in the library. and no view of the wav file. The error box says > "Unable to download peak data, error was: RDXport service returned an > error". All other functions seem fine. Not sure where or what should I > look for? > > System is: > > rdhost - rivendell 2.10.2 - DB schema 242 > CentOs 6.7 final > Kernel Linux 2.6.32-573.3.1.el6.x86_64 > GNOME 2.28.2 > Hardware: AMD Athlon II X2 270 > Mem: 8 Gig > > Many thanks for any suggestions! > > -steve > _______________________________________________ > Rivendell-dev mailing list > Rivendell-dev@lists.rivendellaudio.org > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list Rivendell-dev@lists.rivendellaudio.org http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev