Hi all, I was trying to get RDAirPlay 3.6.5 to work with a Broadcast Tools GPIO to serial device model SRC-4. I was unable to make it work so as part of troubleshooting I decided to experiment with using a modem control line as GPI.
I got started using the super-helpful post: http://wiki.rivendellaudio.org/index.php/Serial_Port_/_Modem_Control_Lines_as_GPIO I see the GPI 1 indicator in GPIMon 3.6.5 illuminate green when I supply voltage to pins 5 and 6 on the serial port, so far so good. I have a macro cart with the command PP S1 1 1 1!. This is the string to play the audio cart loaded in the top left corner of the Sound Panel. If I run the macro cart from RDLibrary 3.6.5 it works like a champ and the tone plays. Next I wanted to see if I can get it play upon activating the GPI. I went to RDAdmin-->Manage Host-->Edit-->Switchers GPIO-->Edit-->Configure GPI, selected GPI 001 -->Edit. For the "ON Transition" I selected the macro cart. I also put the same thing in for the "OFF Transition". I closed everything out and tested but it's still a no-go. I think there's is something simple I'm missing here, (maybe enabling the feature or a permissions issue) but I don't know what...any advice is greatly appreciated. Thanks, Wayne _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
