Further to this I am getting the following in the Rivendell log. May 11 15:02:04 playback1 ripcd: GPI 0:8 ON May 11 15:02:05 playback1 ripcd: GPI 0:8 OFF
On Wed, 2022-05-11 at 14:00 +0000, Mike Cox wrote: Hi all I have butchered a Logitech USB joystick to use as a trigger to set a Mic live light using RDD. My setup is: Reed switch on mixer fader > Logitech joystick button > USB > RDD > External light. I have the USB connected and working on RDGPIMON as it shows channel 8 on and off when I move the fader. The GPIO is set up in RD to trigger two carts (On = 050001 Off = 050002) and these show in RDGPIMON as green and red beneath channel 8. If I run the two carts from the cart panel they work correctly sending an IP message to my Mic lIve light. However, if I use my fader switch the carts are not triggered even though RDGPIMON suggests that they should be. Does anyone have any idea what may not be working correctly or what I can do to fault find it in greater detail. To summarise, the switch and the USB input seem to work fine but RDD does not trigger the configured carts. Many thanks Mike _______________________________________________ Rivendell-dev mailing list <mailto:Rivendell-dev@lists.rivendellaudio.org> Rivendell-dev@lists.rivendellaudio.org <http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________ Rivendell-dev mailing list Rivendell-dev@lists.rivendellaudio.org http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev