On 8/10/07, Tudor GHEORGHE <[EMAIL PROTECTED]> wrote: > lspci | grep Ethernet > 04:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet > Controller (Copper) (rev 03) > 05:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit > Ethernet Controller (rev 05)
Ce placa de baza ai? Stie MSI? http://lwn.net/Articles/44139/ Incearca sa incarci modulul cu irq=.... sau poti sa te jocu cu InterruptThrottleRate http://www.intel.com/support/network/sb/cs-009209.htm > > cat /proc/interrupts > CPU0 CPU1 > 0: 2090791 289362 IO-APIC-edge timer > 1: 1061 0 IO-APIC-edge i8042 > 8: 1 0 IO-APIC-edge rtc > 9: 1 0 IO-APIC-level acpi > 12: 1070 0 IO-APIC-edge i8042 > 16: 574750 0 IO-APIC-level eth0, eth1 > 17: 0 0 IO-APIC-level uhci_hcd:usb4 > 18: 111717 26502 IO-APIC-level libata, uhci_hcd:usb2 > 19: 0 0 IO-APIC-level uhci_hcd:usb3 > 20: 0 0 IO-APIC-level uhci_hcd:usb1, > ehci_hcd:usb5 > NMI: 0 0 > LOC: 2380094 2380125 > ERR: 0 > MIS: 0 > > Se observa ca eth0 si eth1 sunt pe aceeasi intrerupere. Exista vreo > metoda sa le pun pe intreruperi diferite? Sunt onboard. > _______________________________________________ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
