Salut,
Folosind lm_sensors incerc sa ignor niste alarme false de sensori (sau
sa le schimb valorile minime/maxime).
Am output-ul asta:
# sensors
sch5027-i2c-0-2e
Adapter: SMBus I801 adapter at 3000
in0: +4.51 V (min = +0.00 V, max = +6.64 V)
in1: +1.12 V (min = +0.00 V, max = +2.99 V)
in2: +3.31 V (min = +0.00 V, max = +4.38 V)
in3: +0.34 V (min = +0.00 V, max = +1.49 V)
in4: +1.21 V (min = +0.00 V, max = +1.49 V)
in5: +3.28 V (min = +0.00 V, max = +4.38 V)
in6: +3.12 V (min = +0.00 V, max = +4.38 V)
fan1: 0 RPM (min = 2400 RPM) ALARM
fan2: 747 RPM (min = 2400 RPM) ALARM
fan3: 2917 RPM (min = 2400 RPM)
fan4: 2954 RPM (min = 2400 RPM)
fan5: 1500 RPM (min = 2400 RPM) ALARM
fan6: 0 RPM (min = 2400 RPM) ALARM
temp1: -55.0°C (low = -127.0°C, high = +127.0°C)
temp2: +36.2°C (low = -127.0°C, high = +127.0°C)
temp3: +28.0°C (low = -127.0°C, high = +127.0°C)
# sensors --bus-list
bus "i2c-0" "SMBus I801 adapter at 3000"
# cat /etc/sysconfig/lm_sensors
MODULE_0=i2c-i801
MODULE_1=dme1737
MODULE_2=coretemp
In /etc/sensors3.conf am:
chip "dme1737-*"
ignore fan1
ignore fan6
Am incercat si cu chip "i2c-*" dar dupa 'sensors -s' nu s-a schimbat
nimic. Gresesc eu undeva? Nu ar trebui sa dispara alarmele daca ignor
sau modific valori in fisierul de configurare?
Toate bune,
--
Catalin Bucur mailto:[EMAIL PROTECTED]
NOC @ Genius Network SRL - Galati - Romania
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
