Nu trebuie pus ceva in parametrii modulului bonding? On 6/24/10, Tudor Gheorghe <te...@bvnet.ro> wrote: > Salut. > Am un Debian 5.0.4 pe care am: > > auto bond0 > iface bond0 inet manual > slaves eth3 eth4 > bond_mode 802.3ad > bond_miimon 100 > bond_downdelay 200 > bond_updelay 200 > > auto bond1 > iface bond1 inet manual > slaves eth5 eth6 > bond_mode 802.3ad > bond_miimon 100 > bond_downdelay 200 > bond_updelay 200 > > masina este un bridge intre 2 cisco catalyst 3560G. > > S-au ridicat interfetele, pe cisco am "port-channel load-balance > src-dst-ip". > Ce vad eu ca nu ar fi in regula: > > dev In (kbps) In (pps) Out (kbps) Out (pps) > lo 0.00 0.00 0.00 0.00 > eth3 260223.93 36606.44 430365.20 67291.09 > eth4 307294.19 35374.26 0.00 0.00 > eth5 283657.59 38739.11 567187.13 71982.18 > eth6 147176.86 28552.97 0.00 0.00 > > ce vine de la cisco e balansat, dar ce pleaca din debian pleaca doar pe > o interfata din bond, adica din bond0 pe eth3 si din bond1 pe eth5 . > > Cum as putea sa balansez loadul? > > -- > Multumesc, > Teddy > > _______________________________________________ > RLUG mailing list > RLUG@lists.lug.ro > http://lists.lug.ro/mailman/listinfo/rlug >
-- Sent from my mobile device _______________________________________________ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug