Hello Donald / Salut R-lug,
Sorry for bother you but I still have problems with [Subject].
--------------------------------------------------------------------------
ifconfig is giving me this:
eth3 Link encap:Ethernet HWaddr 00:60:97:10:87:9D
inet addr:192.168.35.1 Bcast:192.168.35.255 Mask:255.255.255.0
IPX/Ethernet 802.3 addr:19770426:00609710879D
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:786 errors:0 dropped:0 overruns:0 carrier:65
collisions:3 txqueuelen:100
Interrupt:7 Base address:0x300
I think this is OK ...
---------------------------------------------------------------------------
cat /proc/interrupts
CPU0
0: 5817093 XT-PIC timer
1: 16477 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 324930 XT-PIC NE2000
4: 2248176 XT-PIC serial
7: 0 XT-PIC eth3 ***********************************
8: 3 XT-PIC rtc
9: 187044 XT-PIC eth1
10: 58198 XT-PIC eth0
11: 142856 XT-PIC ncr53c8xx
12: 3609 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 47346 XT-PIC ide0
15: 34083 XT-PIC ide1
NMI: 0
Why the CPU0 is not increasing the value over the eth3?
---------------------------------------------------------------------------
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0200-0203 : PC/64Xe
02f8-02ff : serial(auto)
0300-030f : 3c509 ***************************************************
0340-035f : NE2000
0376-0376 : ide1
03bc-03be : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
6500-651f : eth0
6600-661f : eth1
6700-677f : ncr53c8xx
f000-f007 : ide0
f008-f00f : ide1
OK?
-------------------------------------------------------------------------
When i'm doing insmod with debug=10 ...
[root@lcjdap ~]# insmod 3c509 debug=10
Using /lib/modules/2.2.17/net/3c509.o
3c509 EEPROM word 7 0x6d50.
3c509 EEPROM word 0 0x0060.
3c509 EEPROM word 1 0x9710.
3c509 EEPROM word 2 0x879d.
3c509 EEPROM word 8 0x0010.
3c509 EEPROM word 9 0x7000.
eth3: 3c509 at 0x300 tag 1, 10baseT port, address 00 60 97 10 87 9d, IRQ
7.
3c509.c:1.16 (2.2) 2/3/98 [EMAIL PROTECTED]
3c509 EEPROM word 7 0xffff.
... and ifup eth3:
[root@lcjdap ~]# ifup eth3
Updating the statistics.
Updating the statistics.
eth3: Opening, IRQ 7
status@30e 0001.
eth3: Opened 3c509 IRQ 7 status 2000.
eth3: Setting Rx mode to 1 addresses.
Updating the statistics.
eth3: el3_start_xmit(length = 60) called, status 2000.
[root@lcjdap ~]# eth3: el3_start_xmit(length = 60) called, status
2000.
eth3: el3_start_xmit(length = 60) called, status 2000.
eth3: el3_start_xmit(length = 60) called, status 2000.
eth3: el3_start_xmit(length = 60) called, status 2000.
eth3: el3_start_xmit(length = 60) called, status 2000.
eth3: el3_start_xmit(length = 60) called, status 2000.
---------------------------------------------------------------------------
What this means? Could you help me?
If you need more logs please tell me and i'll send it to you ...
Thanx a lot,
Cosmin
--
SysAdm @ "Alexandru Papiu Ilarian" Highschool Dej
<[EMAIL PROTECTED]>
<http://lcjdap.soroscj.ro/~doom>
<+40-93.514.225>
It's nice to be important
But is more important to be nice
---
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
