On Saturday 06 July 2002 10:33, Ground Zero wrote:
hdparm /dev/hdg
/dev/hdg:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 4865/255/63, sectors = 78165360, start = 0
hdparm -iI /dev/hdg
/dev/hdg:
Model=ST340016A, FwRev=3.10, SerialNo=3HS1Z089
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5
Kernel Drive Geometry LogicalCHS=4865/255/63 PhysicalCHS=77545/16/63
Model=TS430061 A , FwRev=.301 ,
SerialNo=H31S0Z98
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5
Kernel Drive Geometry LogicalCHS=4865/255/63 PhysicalCHS=77545/16/63
hdparm -tT /dev/hdg
/dev/hdg:
Timing buffer-cache reads: 128 MB in 0.82 seconds =156.10 MB/sec
Timing buffered disk reads: 64 MB in 1.58 seconds = 40.51 MB/sec
Astia sunt parametrii fara nici un fel de setare speciala cu hdparm ... pur si
simplu asa sunt vazute discurile !
---
Pentru dezabonare, trimiteti mail la
[EMAIL PROTECTED] cu subiectul 'unsubscribe rlug'.
REGULI, arhive si alte informatii: http://www.lug.ro/mlist/
