Incerc sa pun doua hard-diskuri in mirroring pe un controler raid ide si
nu merge. Mai precis, 'insmod pdcraid failed'. Sistemul este un RH 7.3,
kernel 2.4.18-18.7.x, de la mama lui. Mai jos sunt fragmentele
semnificative:
/proc/pci:
Bus 2, device 14, function 0:
RAID bus controller: Promise Technology, Inc. 20267 (rev 2).
IRQ 9.
Master Capable. Latency=32.
I/O at 0xdff0 [0xdff7].
I/O at 0xdfe4 [0xdfe7].
I/O at 0xdfa8 [0xdfaf].
I/O at 0xdfe0 [0xdfe3].
I/O at 0xdf00 [0xdf3f].
Non-prefetchable 32 bit memory at 0xfeaa0000 [0xfeabffff].
dmesg:
Kernel command line: ro root=/dev/hda1 ide2=0xdff0,0xdfe4,9
ide3=0xdfa8,0xdfe0,9
ide_setup: ide2=0xdff0,0xdfe4,9
ide_setup: ide3=0xdfa8,0xdfe0,9
hda: Maxtor 5T020H2, ATA DISK drive
hdb: WDC WD400BB-00CFC0, ATA DISK drive
hdc: WDC WD400BB-00CLB0, ATA DISK drive
hde: SAMSUNG SP1203N, ATA DISK drive
hdg: SAMSUNG SP1203N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xdff0-0xdff7,0xdfe6 on irq 9
ide3 at 0xdfa8-0xdfaf,0xdfe2 on irq 9
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Grig
