Se da problema:
--------
|server| 192.168.3.1
--------
|
| crossover
|
--------
| AP | 192.168.3.2
--------
eth2 Link encap:Ethernet HWaddr 00:20:AF:C8:91:BD
inet addr:192.168.3.1 Bcast:192.168.3.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:36
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:2562 (2.5 Kb)
Interrupt:12 Base address:0x220
# ping 192.168.3.2
PING 192.168.3.2 (192.168.3.2) from 192.168.3.1 : 56(84) bytes of data.
>From 193.231.139.113 icmp_seq=1 Destination Host Unreachable
>From 193.231.139.113 icmp_seq=2 Destination Host Unreachable
193.231.139.113 este ip-ul server-ului
# tcpdump -ni eth2
tcpdump: listening on eth2
19:32:44.454467 arp who-has 192.168.3.2 tell 193.231.139.113
19:32:45.453333 arp who-has 192.168.3.2 tell 193.231.139.113
# ip r l
193.231.139.9 dev ppp0 proto kernel scope link src 193.231.139.1
194.102.48.204 dev ppp1 proto kernel scope link src 194.102.48.203
193.231.139.0/28 dev eth0 scope link
193.231.139.112/28 dev eth0 proto kernel scope link src
193.231.139.113
194.102.48.192/26 dev eth0 proto kernel scope link src
194.102.48.203
192.168.3.0/24 dev eth2 proto kernel scope link src 192.168.3.1
192.168.2.0/24 dev eth1 scope link
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1
127.0.0.0/8 dev lo scope link
default via 192.129.3.86 dev eth0 src 192.129.3.85
Access point-ul este Zyair b-2000. Are urmatoarele setari:
IP: 192.168.3.2
GW: 192.168.3.1
NM: 255.255.255.0
DNS: 192.168.3.1
Care ar putea fi problema ?
TIA.
//anca14
-------------------------------------------------
Life would be so much easier if we could just look at the source code.
---
Detalii despre listele noastre de mail: http://www.lug.ro/
