Buna oameni buni, Lamuriti-ma, daca vreti, ca eu nu stiu ce sa mai fac ! Am instalat un Tuner Pro-PCTV cu chipser saa7134. Sistemul este RH-9 cu kernel-2.4.22 recompilat cu optiunile necesare pentru video, si patch-uit dupa cum urmeaza:
In primul rind am compilat v4l2-20030826.tar.gz, apoi saa7134-0.2.8.tar.gz, fara probleme sau erori. Am inserat modulul "modprobe saa7134" OK ! Ca sa ma conving la toate-s bune dau "lspci" 0:00.0 Host bridge: ALi Corporation M1541 (rev 04) 00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04) 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev b4) 00:09.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) 00:0a.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 01) 00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev 20) 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee (rev 03) Apoi dmesg (redau numai ce e legat de tuner): Linux video capture interface: v1.00 i2c-core.o: i2c core module saa7130/34: v4l2 driver version 0.2.8 loaded PCI: Found IRQ 10 for device 00:09.0 saa7134[0]: found at 00:09.0, rev: 1, irq: 10, latency: 64, mmio: 0xea001000 saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected] i2c-core.o: adapter saa7134[0] registered as adapter 0. saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: board init: gpio is 39000 i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [saa7134[0]](pos. 0). saa7134[0]: registered device video31 [v4l2] saa7134[0]: registered device vbi31 saa7134[0]: registered device radio31 saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default] # DECI TUNERUL E INSTALAT !! (Sau asha cred :-(( ) Si cu toate asteam cind dau comanda xawtv am eroare: This is xawtv-3.81, running on Linux/i586 (2.4.22) can't open /dev/video0: Device or resource busy v4l2: open /dev/video0: Device or resource busy v4l2: open /dev/video0: Device or resource busy v4l: open /dev/video0: Device or resource busy no video grabber device available NU stiu ce "agata" de /dev/video0, de ce e busy ? Am crezut ca e problema cu driverul de sunet ( e pacatoa asta a lui ESSSolo1, ca asta am. Dar am incercat si cu ALSA, si tot degeaba. Cum pot depista cauza pentru care /dev/video0 e busy ?? Sau ce setari sa-i mai fac xawtv-ului Multumesc > > ------------------------------------------------------- Xnet scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus. Xnet automatically scans all messages for viruses using RAV AntiVirus. Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate variantele lor. Va rugam sa luati in considerare ca exista un risc de fiecare data cand deschideti fisiere atasate si ca MobiFon nu este responsabila pentru nici un prejudiciu cauzat de virusi. Disclaimer: RAV AntiVirus may not be able to detect all new viruses and variants. Please be aware that there is a risk involved whenever opening e-mail attachments to your computer and that MobiFon is not responsible for any damages caused by viruses. --- Detalii despre listele noastre de mail: http://www.lug.ro/
