Buna,
Continui aventura mea cu tunerul, avanseaza dar NU se termina ! :-((
Tunerul este, zic eu instalat , bazat pe urmatoarele informatii:
1) Output "xawtv -hwscan" :
This is xawtv-3.85, running on Linux/i586 (2.4.21-0.13mdk)
looking for available devices
port 85-85
type : Xvideo, image scaler
name : 3dfx Video Overlay
/dev/v4l/video0: OK [ -device /dev/v4l/video0 ]
type : v4l2
name : UNKNOWN/GENERIC
flags: overlay capture tuner
2) "lspci", output:
00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
(rev b4)
00:09.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
00:0a.0 Multimedia audio controller: ESS Technology ES1969 Solo-1
Audiodrive (rev 01)
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev 20)
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee
(rev 03)
3) "dmesg" output:
PCI: Found IRQ 10 for device 00:09.0
saa7134[0]: found at 00:09.0, rev: 1, irq: 10, latency: 64, mmio: 0xea001000
saa7134[0]: subsystem: 5168:0138, board: UNKNOWN/GENERIC
[card=0,autodetected]
saa7134[0]/video: DCSDT: no signal
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device dsp1
saa7134[0]: registered device mixer1
saa7134[0]/video: DCSDT: no signal
# Ce-i asta "saa7134[0]/video: DCSDT: no signal" ????????
Si cu toate astea la scanare cu "scantv", sau cu optiunea din xawtv NU
depistez nici un canal TV,
pe cablul de la ASTRAL, ce-l am in casa.
Pentru a nu intra in derizoriu, iau cablul si-l introduc la televizor,
aflat la 5 metri de comp,
receptioneaza tot. Este cu mufa corecta, fara cirpeli.
Il introduc la tuner, si nu prinde nimic !!!!
Tunerul NU vrea de nici o culoare.
HEEEELP, ce nu e bine ??
Multumesc
---
Detalii despre listele noastre de mail: http://www.lug.ro/
