Salut, am o masina cu 2 procesoare pe care am pus SuSE 9.0, insa nu sunt sigur ca lucreaza ambele procesoare. s9:/ # pico /var/log/boot.msg
Aici apar niste linii pe care nu stiu sa le interpertez si nu stiu daca sa-mi fac probleme in privinta lor <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <4>mtrr: your CPUs had inconsistent variable MTRR settings <4>mtrr: probably your BIOS does not setup all CPUs <6>md: RAID level 1 does not need chunksize! Continuing anyway. <3>kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2 <3>md: personality 3 is not loaded! <4>md :do_md_run() returned -22 <6>md: md1 stopped. <6>md: RAID level 1 does not need chunksize! Continuing anyway. <3>kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2 <3>md: personality 3 is not loaded! <4>md :do_md_run() returned -22 <6>md: md0 stopped. <4>VFS: Mounted root (ext3 filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <6>md: Autodetecting RAID arrays. <1>md: could not import hdh1! <1>md: could not import hdf1! <1>md: could not import hdg1! <1>md: could not import hde1! <6>md: autorun ... Garantez ca in bios sunt setate ambele procesoare, si alte sisteme de operare pe care nu la mentionez le vede "vede". Va rog sa-mi dace ceva comenzi linux cu care as putea sa-mi interoghez cele doua procesoare, si sa vad daca intr-adevar se face acea balanta intre ele. Va rog sa va uitati pe randurile de mai jos. Mai sunt ceva nereguli... Poate voi veti vedea mai multe ca mine... Inspecting /boot/System.map-2.4.21-99-smp4G Loaded 21822 symbols from /boot/System.map-2.4.21-99-smp4G. Symbols match kernel version 2.4.21. Loaded 123 symbols from 6 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-99-smp4G ([EMAIL PROTECTED]) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Wed Sep 24 14:13:20 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) <4> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) <4> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>128MB vmalloc/ioremap area available. <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0002000 <4>found SMP MP-table at 000fb110 <4>hm, page 000fb000 reserved twice. <4>hm, page 000fc000 reserved twice. <4>hm, page 000f5000 reserved twice. <4>hm, page 000f6000 reserved twice. <4>On node 0 totalpages: 262128 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 32752 pages. <6>ACPI: RSDP (v000 AMI ) @ 0x000fc590 <6>ACPI: RSDT (v001 AMIINT 00000.00016) @ 0x3fff0000 <6>ACPI: FADT (v001 AMIINT 00000.00017) @ 0x3fff0030 <6>ACPI: MADT (v001 AMIINT 00000.00009) @ 0x3fff00b0 <6>ACPI: DSDT (v001 VIA APOLLO-P 00000.04096) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 Pentium(tm) Pro APIC version 16 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <4>Processor #1 Pentium(tm) Pro APIC version 16 <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC[0]: Assigned apic_id 2 <4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 <6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) <6>ACPI: INT_SRC_OVR (bus[0] irq[0xb] global_irq[0xb] polarity[0x3] trigger[0x3]) <6>Using ACPI (MADT) for SMP configuration information <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hda3 vga=0x317 desktop splash=silent <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 1130.538 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 2228.22 BogoMIPS <6>Memory: 1023480k/1048512k available (1880k kernel code, 16324k reserved, 638k data, 188k init, 131008k highmem) <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0383fbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) <4>mtrr: detected mtrr type: Intel <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0383fbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Pentium(R) III CPU family 1133MHz stepping 01 <4>per-CPU timeslice cutoff: 1463.49 usecs. <4>task migration cache decay timeout: 2 msecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000004 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 2252.80 BogoMIPS <6>CPU: L1 I cache: 16K, L1 D cache: 16K <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 2252.80 BogoMIPS <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0383fbff 00000000 00000000 00000000 <4>CPU1: Intel(R) Pentium(R) III CPU family 1133MHz stepping 01 <6>Total of 2 processors activated (4481.02 BogoMIPS). <4>ENABLING IO-APIC IRQs <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 16. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178011 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0011 <7>.... register #02: 00000000 <7>....... : arbitration: 00 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 0 0 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 1 1 0 1 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 003 03 0 0 0 0 0 1 1 91 <7> 0f 003 03 0 0 0 0 0 1 1 A1 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1129.0214 MHz. <4>..... host bus clock speed is 132.0848 MHz. <4>cpu: 0, clocks: 132848, slice: 44282 <4>CPU0<T0:132848,T1:88560,D:6,S:44282,C:132848> <4>cpu: 1, clocks: 132848, slice: 44282 <4>CPU1<T0:132848,T1:44272,D:12,S:44282,C:132848> <4>checking TSC synchronization across CPUs: passed. <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <4>mtrr: your CPUs had inconsistent variable MTRR settings <4>mtrr: probably your BIOS does not setup all CPUs <6>ACPI: Subsystem revision 20030619 <6>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 <6>PCI: Using configuration type 1 <6>Looking for DSDT in initrd ... not found! <7>IOAPIC[0]: Set PCI routing entry (2-11 -> 0x81 -> IRQ 11) Mode:1 Active:1 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>ACPI: Power Resource [URP1] (off) <6>ACPI: Power Resource [URP2] (off) <6>ACPI: Power Resource [FDDP] (off) <6>ACPI: Power Resource [LPTP] (off) <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <6>PCI: Probing PCI hardware <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 <7>IOAPIC[0]: Set PCI routing entry (2-10 -> 0x79 -> IRQ 10) Mode:1 Active:1 <7>00:00:07[C] -> 2-10 -> IRQ 10 <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 <7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:1 <7>00:00:07[D] -> 2-9 -> IRQ 9 <7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17) Mode:1 Active:1 <7>00:00:09[A] -> 2-17 -> IRQ 17 <7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18) Mode:1 Active:1 <7>00:00:09[B] -> 2-18 -> IRQ 18 <7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19) Mode:1 Active:1 <7>00:00:09[C] -> 2-19 -> IRQ 19 <7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16) Mode:1 Active:1 <7>00:00:09[D] -> 2-16 -> IRQ 16 <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>PCI: Enabling Via external APIC routing <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: disabled - APM is not SMP safe. <4>PISCH: Plug In Scheduler Interface (Version 6) <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 65532 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xda000000, mapped to 0xf881b000, size 4096k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0 <6>vesafb: protected mode interface info at c000:04e0 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 22326 bytes, found (1024x768, 11098 bytes, v3). <6>bootsplash: silent jpeg found. <6>bootsplash: silent jpeg found. <4>Console: switching to colour frame buffer device 118x38 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: IDE controller at PCI slot 00:07.1 <6>VP_IDE: chipset revision 6 <6>VP_IDE: not 100%% native mode: will probe irqs later <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 <6> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA <6>SiI680: IDE controller at PCI slot 00:0a.0 <6>SiI680: chipset revision 2 <6>SiI680: not 100%% native mode: will probe irqs later <6>SiI680: BASE CLOCK == 100 <6> ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio <6> ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio <4>hda: WDC WD200BB-00DEA0, ATA DISK drive <4>blk: queue c046dd20, I/O limit 4095Mb (mask 0xffffffff) <4>hdd: SONY CD-ROM CDU523 1, ATAPI CD/DVD-ROM drive <4>hde: Maxtor 6Y080L0, ATA DISK drive <4>hdf: Maxtor 6Y080L0, ATA DISK drive <4>blk: queue c046e668, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c046e7cc, I/O limit 4095Mb (mask 0xffffffff) <4>hdg: Maxtor 6Y080L0, ATA DISK drive <4>hdh: Maxtor 6Y080L0, ATA DISK drive <4>blk: queue c046eb0c, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c046ec70, I/O limit 4095Mb (mask 0xffffffff) <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ide2 at 0xf8c27f80-0xf8c27f87,0xf8c27f8a on irq 18 <4>ide3 at 0xf8c27fc0-0xf8c27fc7,0xf8c27fca on irq 18 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(100) <4>hde: attached ide-disk driver. <4>hde: host protected area => 1 <6>hde: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(133) <4>hdf: attached ide-disk driver. <4>hdf: host protected area => 1 <6>hdf: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(133) <4>hdg: attached ide-disk driver. <4>hdg: host protected area => 1 <6>hdg: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(133) <4>hdh: attached ide-disk driver. <4>hdh: host protected area => 1 <6>hdh: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(133) <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 hda3 <6> hde: hde1 <6> hdf: [PTBL] [9964/255/63] hdf1 <6> hdg: [PTBL] [9964/255/63] hdg1 <6> hdh: [PTBL] [9964/255/63] hdh1 <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6> [events: 00000009] <6> [events: 00000005] <6> [events: 00000009] <6> [events: 00000005] <6>md: autorun ... <6>md: considering hdh1 ... <6>md: adding hdh1 ... <6>md: adding hdf1 ... <6>md: created md1 <6>md: bind<hdf1,1> <6>md: bind<hdh1,2> <6>md: running: <hdh1><hdf1> <6>md: hdh1's event counter: 00000005 <6>md: hdf1's event counter: 00000005 <6>md: RAID level 1 does not need chunksize! Continuing anyway. <3>kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2 <3>md: personality 3 is not loaded! <4>md :do_md_run() returned -22 <6>md: md1 stopped. <6>md: unbind<hdh1,1> <6>md: export_rdev(hdh1) <6>md: unbind<hdf1,0> <6>md: export_rdev(hdf1) <6>md: considering hdg1 ... <6>md: adding hdg1 ... <6>md: adding hde1 ... <6>md: created md0 <6>md: bind<hde1,1> <6>md: bind<hdg1,2> <6>md: running: <hdg1><hde1> <6>md: hdg1's event counter: 00000009 <6>md: hde1's event counter: 00000009 <6>md: RAID level 1 does not need chunksize! Continuing anyway. <3>kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2 <3>md: personality 3 is not loaded! <4>md :do_md_run() returned -22 <6>md: md0 stopped. <6>md: unbind<hdg1,1> <6>md: export_rdev(hdg1) <6>md: unbind<hde1,0> <6>md: export_rdev(hde1) <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>cryptoapi: loaded <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 254k freed <4>VFS: Mounted root (ext2 filesystem). <6>Journalled Block Device driver loaded <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 188k freed <6> [events: 00000009] <6> [events: 00000009] <6>md: autorun ... <6>md: considering hdg1 ... <6>md: adding hdg1 ... <6>md: adding hde1 ... <6>md: created md0 <6>md: bind<hde1,1> <6>md: bind<hdg1,2> <6>md: running: <hdg1><hde1> <6>md: hdg1's event counter: 00000009 <6>md: hde1's event counter: 00000009 <6>md: RAID level 1 does not need chunksize! Continuing anyway. <6>md: raid1 personality registered as nr 3 <6>md0: max total readahead window set to 508k <6>md0: 1 data-disks, max readahead per data-disk: 508k <6>raid1: device hdg1 operational as mirror 1 <6>raid1: device hde1 operational as mirror 0 <6>raid1: raid set md0 active with 2 out of 2 mirrors <6>md: updating md0 RAID superblock on device <6>md: hdg1 [events: 0000000a] <6>(write) hdg1's sb offset: 80035712 <6>md: hde1 [events: 0000000a] <6>(write) hde1's sb offset: 80043136 <6> [events: 00000000] <3>md: invalid raid superblock magic on md0 <4>md: md0 has invalid sb, not importing! <4>md: no nested md device found <6>md: ... autorun DONE. <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal <6> [events: 00000005] <6> [events: 00000005] <6>md: autorun ... <6>md: considering hdh1 ... <6>md: adding hdh1 ... <6>md: adding hdf1 ... <6>md: created md1 <6>md: bind<hdf1,1> <6>md: bind<hdh1,2> <6>md: running: <hdh1><hdf1> <6>md: hdh1's event counter: 00000005 <6>md: hdf1's event counter: 00000005 <6>md: RAID level 1 does not need chunksize! Continuing anyway. <6>md1: max total readahead window set to 508k <6>md1: 1 data-disks, max readahead per data-disk: 508k <6>raid1: device hdh1 operational as mirror 1 <6>raid1: device hdf1 operational as mirror 0 <6>raid1: raid set md1 active with 2 out of 2 mirrors <6>md: updating md1 RAID superblock on device <6>md: hdh1 [events: 00000006] <6>(write) hdh1's sb offset: 80035712 <6>md: hdf1 [events: 00000006] <6>(write) hdf1's sb offset: 80035712 <6> [events: 00000000] <3>md: invalid raid superblock magic on md1 <4>md: md1 has invalid sb, not importing! <4>md: no nested md device found <6>md: ... autorun DONE. <6>md: Autodetecting RAID arrays. <1>md: could not import hdh1! <1>md: could not import hdf1! <1>md: could not import hdg1! <1>md: could not import hde1! <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.0.1-ioctl (2003-07-12) initialised: [EMAIL PROTECTED] <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal <6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,1), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>Adding Swap: 2104504k swap-space (priority 42) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Mon Mar 1 04:23:58 2004 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.md boot.device-mapper) Initializing Multiple Devices... considering /dev/md0... /dev/md0 is not a RAID0 or LINEAR array, skipping. considering /dev/md1... /dev/md1 is not a RAID0 or LINEAR array, skipping. Run file system check on root for device mapper setup fsck 1.34 (25-Jul-2003) /dev/hda3: clean, 248638/2117440 files, 1130522/4233127 blocks doneRemounting root file system (/) read/write... Activating device mapper... Creating /dev/mapper/control character device with major:10 minor:63. Remounting root file system (/) read-only again... done <notice>exit status of (boot.md boot.device-mapper) is (0 0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) /dev/hda3: clean, 248638/2117440 files, 1130522/4233127 blocks linii care n-au mai fost puse Multumesc! --- Detalii despre listele noastre de mail: http://www.lug.ro/
