iata ce imi zice la dmesg 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xf8846000, 00:40:f4:a6:83:e7, IRQ 17 eth0: Identified 8139 chip type 'RTL-8100B/8139D' r8169 Gigabit Ethernet driver 1.2 loaded r8169: PCI device 0000:00:0b.0: unknown chip version, assuming RTL-8169 r8169: PCI device 0000:00:0b.0: TxConfig = 0x4000000 eth1: Identified chip type is 'RTL-8169'. eth1: RealTek RTL8169 Gigabit Ethernet at 0xf8848000, 00:50:fc:f9:6b:35, IRQ 19 eth1: Auto-negotiation Enabled. eth1: 100Mbps Full-duplex operation. r8169: PCI device 0000:00:0c.0: unknown chip version, assuming RTL-8169 r8169: PCI device 0000:00:0c.0: TxConfig = 0x4000000 eth2: Identified chip type is 'RTL-8169'. eth2: RealTek RTL8169 Gigabit Ethernet at 0xf884a000, 00:50:fc:f6:a1:9b, IRQ 16 eth2: Auto-negotiation Enabled. eth2: 1000Mbps Full-duplex operation.
----- Original Message ----- From: "Mihai Rusu" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 03, 2004 1:10 PM Subject: [rlug] Re: mii-tool problem > On Wed, 3 Nov 2004, Mauritius Mihai wrote: > Ce drivere folosesti pt eth1/eth2 ? Nu suporta SIOCGMIIPHY (interfata > mii-tool). Incearca cu ethtool. --- Detalii despre listele noastre de mail: http://www.lug.ro/
