I've had good success using JFS on 4 2.0 TB SATA arrays. I'm using a
custom 2.4.27 kernel on Debian and the stock jfsutils. We have not had
any OOPS on the machine and use NFS for remote mounts.
Here's my experiences with other file systems:
- XFS had kernel OOPs several times when I tried that. Our uptime was
horrible and that was only with 1 array live.
- EXT3 had problems losing data on reboots or crashes. It quickly became
annoying.
- I haven't tried ReiserFS. Heard that version 4 is still stabilizing
but that 3 is pretty nice.
-Scott
Sebastian Smith wrote:
Hey guys,
I used JFS in Gentoo Linux about a year ago. I found it to be very
unstable -- I canceled a large network transfer and it borked the
filesystem... twice. Hopefully you will have better luck, but be sure
to do extensive testing before you store data on the drive. EXT3 or
Reiserfs may be better choices.
As far as distros go I would suggest Gentoo... of course ;)
http://www.gentoo.org
http://forums.gentoo.org (great source of information)
http://gentoo-wiki.com (another great source of information)
If you don't feel comfortable with a command line, and a cryptic install
process I would forget it. Most distros will have support for your
hardware so you'll have a lot of options.
Come to our meeting tomorrow (7/14): 6:00pm at UNR. We can discuss your
installation as a mini-topic ;)
http://lists.rlug.org/pipermail/rlug-announce/2005/000102.html
- Sebastian
On Wed, 13 Jul 2005, James Washer wrote:
I'll jump into the middle of this with some background. I'm the one
that suggested Mike post here. I'm running a dual EM64T Xeon with an
Intel 82801EB (ICH5) SATA controller, running 2.6.11.x and I get OOM
conditions when I hammer the drives. It might be a 64bit kernel issue.
I've not tried booting a 32bit kernel. It might just be that SATA in
"new"
I think most everything Mike needs will be included in just about any
2.6 based distro, but we both share SATA concerns.
- jim
BTW, I think you can grab the JFS source at IBM websites.
On Wed, 13 Jul 2005 07:59:24 -0700
Mike Galgano <[EMAIL PROTECTED]> wrote:
It was suggested that I ask my question in this forum, to which I am
a newcomer....
What current port would you folks suggest for a 3.0GHZ P4
w/hyperthread and SATA? Is there one out there that has JFS? I expect
to support inet functions (proxy/dns/etc) and some ham radio
functions to start.
I've been away from 'hands on' use in the xNIX world for about 4
years, and want to jump back in. My experience is mostly AIX, but
some hpux, solaris, red hat, mandrake...
Hope this generates less than a 'throw a rock in a pack of dogs'
response... it is meant to be innocent, and genuine.
Thanks,
Mike G
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.13/47 - Release Date: 7/12/05
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
