Rombox works, I have a pretty recent one running on my RecV1. You have to use Bootbox, though. Look in the daily builds, they should contain it, too.
> I had no luck to compile rombox since ~2 months for archos targets > (ondio, V1Rec, FM-rec). The rockbox.ucl file will be created and runs fine. If i > download the latest (precopiled) build, an rombox.ucl is included but not > working (flash size too big). You seem to miss a tool. Below looks rather different, the new self-extracting .ajz can't be built. This has been introduced to overcome another limit: the 200kB barrier for non-flashers. > Can I say we will go away from archos targets > and will only fully support "modern" targets? I definitely won't hope so. A message to our "new" developers who don't have an Archos: please code with "size matters" discipline, especially if that code ends up in the Archos models, too. Else we may end up with a fork, something very nasty. Perhaps this is a DevCon topic. > And (again): what can I do to make the binary size smaller? What must I do > to exclude some for me not needed features? Are there such options? Not yet. Some debug screens could go, but don't save too much. Jörg > > ______ > ... > OBJCOPY rockbox.bin > UCLPACK rockbox > Build firmware file > error: firmware image is 211058 bytes while max size is 204800! > Image too big, making a compressed version! > make[2]: *** No rule to make target `/home/guest/tools/ucl2src.pl', needed > by /home/guest/my/firmware/decompressor/uclimage.c'. Stop. > /home/guest/my/firmware/decompressor/compressed.bin: No such file or > directory > make[1]: *** [/home/guest/my/ajbrec.ajz] Error 255 > make: *** [all] Error 2 -- DSL-Aktion wegen großer Nachfrage bis 28.2.2006 verlängert: GMX DSL-Flatrate 1 Jahr kostenlos* http://www.gmx.net/de/go/dsl