I am terribly sorry. I measured pitch of the connector against lm339 on the photo and connector is standard 1.0 mm pitch. This one is easy to get. Sorry again. Anyway - Linus can You confirm H300 uses 20pin 1.0mm pitch connector - from photos it looks exactly the same as in HD200.
2009/11/23 Marcin Bukat <marcin.bu...@gmail.com> > Hi Linus, > Looking at H300 BDM port I think HD200 use the same connector so You > probably know the proper part pitch. > > 2009/11/23 Marcin Bukat <marcin.bu...@gmail.com> > > I am not. I may be 0.5 mm as well. I can't measure pitch properly. >> >> 2009/11/23 pondlife <pondl...@ntlworld.com> >> >> Hi Linus, >>> >>> Slightly hijacking this thread, does the H300 BDM interface have a >>> connector? I assumed it was a soldering job, but if it's pluggable, I >>> plan >>> to buy a wiggler! >>> >>> pondlife >>> >>> >>> >>> >> >