Karl Kurbjun <kkurb...@gmail.com> schrieb:
>Hey all, > >I am in the process of cleaning up some old projects and I have a >couple of >development devices that I no longer need for so I thought I would see >if >there is interest here. > >The first is a Gigabeat F with JTAG and UART soldered out the side with >a >ribbon cable - it is missing the side and bottom panel but is otherwise >in >one piece. The touch pad is sensitive which makes it difficult to use >through the menus, but I might have another digitizer I can send with >it >along with some other spare parts. It has a 30GB hard drive. > >The second is an Olympus M:Robe 500 with JTAG soldered out the top >(with a >small cut in the case to accommodate the ribbon cable). From what I >recall >JTAG is a bit twitchy though. The Olympus comes with a stand, remote >control, and a homemade USB cable. There is a 20GB hard drive in this >device and I have replaced the flash so it has a fully replaced >bootloader >- boot time from fully off is about 10 seconds or so. The boot process >is >a little iffy though - sometimes the screen tweaks out and it has to be >reset. > >Both would come with a power supply if I can find them. > >I do not have time to hack on them anymore so they are free to a >developer >that would give them a good home (if anyone is even interested). I >don't >mind shipping in the USA for free - anything else would have to be >discussed. > >-Karl Sorry to hear you spare time doesn't allow rockbox hacking anymore. The shipping can be handled by the fund, I'd say. Best regards.