After a quick look into your problems with patchbot it seems that vbox scripts were missing some errorlevel checks, which should bail out the test run at prepare stage when ISO was not present (which is the situation when you dont pass the proper revision/id number. Same thing was with newcc1 tests. I added some debug prints so if my current solution wont do its job, i`ll at least know bit more about the problem.
By that occasion i found out a problem with current ROSBE - its not emitting proper ERRORLEVEL at the end of the build, due to tee/buildtime/flash/sound playback or any of similar crap that is getting the final ERRORLEVEL value. For main building step i hacked around this issue by simply checking for ISO file at the end and erroring out if its not there. For host building part, this is more complicated. I tried removing the stuff mentioned above, but it still doesnt work. Dreimer: it would be of help if you could fix this problem. -- With best regards Caemyr _______________________________________________ Ros-dev mailing list Ros-dev@reactos.org http://www.reactos.org/mailman/listinfo/ros-dev