On Tue, Sep 9, 2008 at 10:21 PM, Alex Waugh <[EMAIL PROTECTED]> wrote:
> That all looks correct, so I would expect pinging 172.31.0.1 from RISC > OS to work. Equally, pinging 172.31.0.2 from linux should work. > For accessing any other addresses, the gateway in RISC OS should be set > to 172.31.0.1, and Linux should be configure to route or NAT the traffic > to the outside world. Got it working. The problem is that my tap0 interface doesn't get a IPv4 address but an IPv6 address. So I manually set it to 172.31.0.1 and viola got connection to linux. After reconfiguring the firewall to enable packet forwarding I have now connection to the internet with rpcemu. Many thanks for your help. Got an question though, do you perhaps know how I can configure my debian system so that the tap0 interface automatically gets an IPv4 address. Now I always have to set it manually with ifconfig. MrSeed _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
