2009/4/15 Peter Howkins <[email protected]>: > Known Issues > > - RISC OS 6 Preview 3 will only boot with Interpreter if processor type > is StrongARM > - RISC OS 6 Preview 3 will not yet boot with 64-bit DynaRec > > Could other users let us know of any further versions of RISC OS 6 that > work or don't work with 0.8.3?
Er, I'm afraid I've got confused with the version numbering/naming conventions used by ROL now. I can report though that the version I've got which declares itself as: RISC OS 6.06 (19 Mar 2007) 128MB Select 4i2 (r16867 26 bit) won't boot into the desktop. Interpreter with ARM610 almost immediately gives Abort on Data transfer at &03884E7C. Interpreter with StrongARM starts to boot and gets to a green screen (http://www.ollieclark.com/RPCEmu/IntSA.png) with ROL logo and a red error box (I presume). If I press [Return], the red box clears and the screen changes slightly (http://www.ollieclark.com/RPCEmu/IntSA2.png). If I then press any key I get to a supervisor prompt and typing desktop gives me a completely grey screen (so almost there, I think). DynRec gives the same as for interpreter with SA but hangs after typing desktop. It's all working very well with Adjust though. Thanks for all the work on this. _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
