In article <[email protected]>, Peter Howkins <[email protected]> wrote: > On Tue, Mar 16, 2010 at 07:56:47PM +0000, David wrote:
> > It then opened up a blue window with "MIPS:292.8. AVG:30..." (the > > MIPS fluctuating). > > > > My RO version is 3.70; the rpc.cfg is: > > > > cpu_type = ARM710 > Just checked the result our autotester, the blue screen is a known > result of risc os 3.70, whilst running the recompiler version > (dynarec) with ATM610 or ARM710 processors. > Here are a couple of workarounds. > a) Change the cpu_type from 'ARM710' to 'SA110' > b) Run the interpretted version > Hope this helps. I'll give them a try. Meanwhile, I've been given RO 4.02 and got much further with that. Next problem is when I tried to change from HostFS to EmuFS, following the instructions. I got: <quote> rpcemu: hostfs.c:1699: hostfs: Assertion `state->Reg[9] <= 7' failed. Shutting down Allegro due to signal #6 Aborted <endquote> No problems that I could see until that point, and I'd even managed to configure a CDrom drive which I hadn't been able to do previously. Even now I've removed the changes I'd made to the rpc.cfg file, I'm still getting that problem. Quite disheartening after having had a working desktop! > By the way, blank formatted hard drive images are available for > download off the website, if you run into trouble creating them with > HForm again. Thanks. If I get that far...;-) -- David - david atcost ukpoets fullstop net _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
