On 28 Sep 2010, at 23:41, Musus Umbra wrote: > I've just done a couple of quick experiments with RO5.17 with RPCEmu > 0.8.8, following the instructions at > http://www.marutan.net/rpcemu/ro5.html
> I tried different setups to see what worked and what failed; here's my > results... > > RPCEmu built for x86_64, on Linux: > > * cpu_type ARM610 + interpreter => hangs at the RO5 splash screen, with > an hourglass running after step C. > > * cpu_type ARM610 + recompiler => Gives an abort on data transfer at > &FC141D5C at step 3, but Cancelling that error allows me to continue. > Step D is instead replaced with the recurring 'ofla' error box after the > RO5 splash screen. > > * cpu_type SA110 + interpreter => All is well. > > * cpu_type SA110 + recompiler => Same abort on data transfer as with > ARM610, but no other problems. RPCEmu boots into RO5.7 just fine and I > say "Cool." > > Built for i686 (still on Linux): > > * cpu_type ARM610 + interpreter => Never makes it to step D. On reboot > the rpc sits at the RO5 splash screen with an hourglass running. > > * cpu_type ARM610 + recompiler => Never makes it to step D. On reboot > the rpc throws a never ending series of 'File ofla not found error > boxes'. > > * cpu_type SA110 + interpreter => All is well. > > * cpu_type SA110 + recompiler => All is well. Thanks for those tests Adny :-) Behaviour on Mac is similar to Linux/i686 for cpu types ARM610 and SA110 with recompiler (I've never tried it with recompiler). RPCEmu is always built as 32-bit on OS X. It can't be built as 64-bit because Allegro can't be built as 64-bit on OS X. Francis _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
