I have isntalled 0.8.9 rpcemu and at first attempt to enable ethernet bridge it restarts correctly. Now i dont know how to port netsurf from my windows 7 hd to rpcemu hard disk. to try to see if it works. I have windows at 64 bit.
Il 22 aprile 2012 15:03, Tony Moore <[email protected]> ha scritto: > On 22 Apr 2012, Matteo Trevisan <[email protected]> wrote: >> Il 21 aprile 2012 22:59, Tony Moore <[email protected]> ha >> scritto: >> > On 21 Apr 2012, Matteo Trevisan <[email protected]> wrote: >> > >> > > i have configured the last rpcemu with the rom 5.19 from rool usb >> > > stick emulate to work with windows 7. I have made a bridge >> > > connection with tap.My problem is that when i try to enable the >> > > ethernet bridge under rpcemu and restart i get an this >> > > error:Tap-Win32:Could not open 'rpcemu'.if i click over it i get >> > > Networking unaviable. >> > >> > I don't have the ROOL USB stick, but here RPCEmu 0.8.9 / Win7hp32b >> > runs RO 5.19 (12-Feb-12), with stable networking. My network bridge >> > is also made to an ethernet connection, and survives a Win7 re-boot. >> > >> > Your error message suggests that something is amiss with the bridge. >> > You presumably followed >> > http://www.marutan.net/rpcemu/manual/net-win.html to set up the >> > bridge. Did you include the additional Win7 configuration, near the >> > bottom of that page? Are you using the latest OpenVPN 2.2.2 ? >> >> Yes Tony i have made the connection following the description in that >> site. Open vpn is 2.2.2. >> rpcemu is 0.8.8. > > RPCEmu 0.8.9 is available at http://www.marutan.net/rpcemu/ , I would > suggest that you try that first. In Settings > Configure... the CPU type > needs to be StrongARM. Not that it may make a difference to networking, > but is your copy of Win7 32 or 64bit? Other writers here have reported > networking success - and failure - with other Win7 versions. > > I see your error message, if I try to run two copies of RPCEmu (ie 4.39 > and 5.19) at the same time. I guess that this must be because the first > copy connects to the rpcemu bridge, so access for the second copy is > refused. Could some other program have already claimed your bridge? Does > the bridge survive Win7 re-booting? If not, I suppose that this could > also explain your error message. > > Tony > > > _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
