In message <[email protected]> on 30 Nov 2012 george greenfield wrote:
> In message <[email protected]> > Matthew Phillips <[email protected]> wrote: > > > You don't need to go to the trouble of using MakeModes or CustomRPC. > > Just go to the MDF and add the modes you require by hand using a text > > editor. For a real RISC PC you need to make sure all the timing values > > are correct so that the picture will be stable on a CRT monitor, but > > RPCEmu really doesn't care about most of the values. If you just edit > > the x_res and y_res that's sufficient in my experience. > > Not in mine, unfortunately: I copied my current MDF and changed the x > and y res (and the name of the resolution) to 1824 x 1026, which > produced an 'Inconsistent parameters' error when I attempted to select > it under Boot-Configure-Screen. Sorry: I forgot about keeping the h_timings and v_timings lines in step. See my other message. If you still have trouble, alter y to be a multiple of 8 too, but I don't think that really matters. -- Matthew Phillips Durham _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
