Found this in the log.
Tap-Win32: device name: rpcemu
Tap-Win32: device path:
\\.\Global\{070E7820-9C49-40FC-82B5-6470976FFDDD}.tap
Tap-Win32: File opened
Tap-Win32: version: 9.21.0
Tap-Win32: status set
Tap-Win32: tap_win32_overlapped_init done
Tap-Win32: Thread created
...
Tap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: ERROR_IO_PENDING - beforeTap-Win32: ERROR_IO_PENDING -
afterTap-Win32: tap_cleanup
Bye, David
2015-05-11 22:06 GMT+02:00 David Feugey <[email protected]>:
> Small but important correction.I made tests again. Interface is OK under
> RISC OS with right MAC address.
> When pinging something, packets are sent, answer is received by the bridge
> but does not reach the TAP interface.
> Nota: the same TAP module works with OpenVPN.
> Perhaps I should try with an old version of TAP?
>
> By, David
>
>
>
> 2015-05-11 21:23 GMT+02:00 David Feugey <[email protected]>:
>
>> Of course, I also tried to make it again from scratch with new TAP and
>> new RPCemu set up, with exactly the same result: some error sometimes, and
>> when no error, no network connection. All seems OK, but packets are not
>> received by the TAP interface.
>>
>>
>> 2015-05-11 21:20 GMT+02:00 David Feugey <[email protected]>:
>>
>>> Yes. I also applied the commands to correct connection ; configured the
>>> ROS side ; and launched
>>> RPCEmu with network connection, and no alert.
>>>
>>> I made this, http://www.marutan.net/rpcemu/manual/net-win.html
>>> this http://www.marutan.net/rpcemu/manual/net-ro.html
>>> and this http://www.marutan.net/rpcemu/manual/net-ro-bri.html
>>>
>>> Of course, ping does not work
>>>
>>> I suspect many possibilities:
>>> 1/ problem with 64 bit OS
>>> 2/ problem with version of TAP
>>> 3/ problem with RISC OS 5.22
>>> 4/ problem with RPCEmu
>>> 5/ all of this :)
>>>
>>>
>>> Bye, David
>>>
>>> 2015-05-11 20:18 GMT+02:00 Dave Symes <[email protected]>:
>>>
>>>> In article
>>>> <cac85+4kfpiyf6f4m0ljvyfnaoqbstx76ooivfjyguyuqvku...@mail.gmail.com>,
>>>> David Feugey <[email protected]> wrote:
>>>> > My setup: Windows 7 Pro 64bit
>>>> > On the RISC OS side: RPCEMu, last version + RISC OS 5.22
>>>>
>>>> > In the middle, me, almost no hair left :)
>>>>
>>>> > I configured the bridge, put the right options, and no connection.
>>>> > No packets are received by the bridge. The other part (Windows one)
>>>> works
>>>> > normally.
>>>>
>>>> > Should I use a very specific of OpenVPN? Problem with IPv6 or 64bit?
>>>> > Problem with ROS 5.22?
>>>> > I don't need to connect every day. It's just for !Store.
>>>>
>>>> > I would be so happy to get a simple 'client mode networking' a la
>>>> Virtual
>>>> > Risc PC :)
>>>> > (would solve also lot of problems when connecting to DHCP network or
>>>> > multiples networks).
>>>>
>>>> > Bye, David
>>>>
>>>> One idle thought...
>>>> You have been to Win side Control panel-Network Connections and after
>>>> selecting both the "rpcemu" and original interface, done the Menu
>>>> "Bridge
>>>> Connections" bit?
>>>>
>>>> Dave
>>>>
>>>> --
>>>>
>>>> Dave Triffid
>>>>
>>>> _______________________________________________
>>>> Rpcemu mailing list
>>>> [email protected]
>>>> http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
>>>>
>>>
>>>
>>>
>>> --
>>> Mobile : 06 76 67 91 60
>>>
>>
>>
>>
>> --
>> Mobile : 06 76 67 91 60
>>
>
>
>
> --
> Mobile : 06 76 67 91 60
>
--
Mobile : 06 76 67 91 60
_______________________________________________
Rpcemu mailing list
[email protected]
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
