Il giorno ven, 05/04/2013 alle 23.27 +0100, Sérgio Basto ha scritto: > On Ter, 2013-04-02 at 06:36 +0100, Sérgio Basto wrote: > > -------- Forwarded Message -------- > > From: Dario Lesca <[email protected]> > > Reply-to: Development discussions related to Fedora > > <[email protected]> > > To: Fedora Devel <[email protected]> > > Cc: Fedora Users <[email protected]> > > Subject: fedora18: Wireless Broadcom Corporation BCM43142 802.11b/g/n > > Date: Tue, 02 Apr 2013 03:05:45 +0200 > > > > Hi, My netbook Asus have this network Wireless controller: > > > > > 02:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n > > > (rev 01) > > > Subsystem: AzureWave Device 2107 > > > Flags: bus master, fast devsel, latency 0, IRQ 3 > > > Memory at f7d00000 (64-bit, non-prefetchable) [size=32K] > > > Capabilities: [40] Power Management version 3 > > > Capabilities: [58] Vendor Specific Information: Len=78 <?> > > > Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ > > > Capabilities: [d0] Express Endpoint, MSI 00 > > > Capabilities: [100] Advanced Error Reporting > > > Capabilities: [13c] Virtual Channel > > > Capabilities: [160] Device Serial Number 00-00-d9-ff-ff-09-6c-71 > > > Capabilities: [16c] Power Budgeting <?> > > > > and not work out of the box or with rpmfusion's wl driver. > > > > For now I have found this howto: > > http://forums.fedoraforum.org/archive/index.php/t-282334.html > > > > and with this procedure: > > > > > #!/bin/bash > > > # > > > # http://forums.fedoraforum.org/archive/index.php/t-282334.html > > > > > > set -x > > > dtmp=$(mktemp -d) > > > > > > # wget -c > > > http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb > > > rpm -q dpkg || yum install dpkg > > > > > > dpkg-deb -x wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb $dtmp > > > > > > cd $dtmp/usr/src/wireless-bcm43142-6.20.55.19/ > > > > > > make API=WEXT > > > > > > mkdir -p /lib/modules/$(uname -r)/extra/wl > > > rm -f /lib/modules/$(uname -r)/extra/wl/wl.ko > > > cp ./wl.ko /lib/modules/$(uname -r)/extra/wl/. > > > > > > depmod -a > > > > > > modprobe -r wl > > > sleep 2 > > > ip a > > > > > > modprobe wl > > > sleep 2 > > > ip a > > > > > > cd > > > rm -rf $dtmp > > > > the wl driver work fine. > > > > My question is: There is an official Fedora driver (embedded, akmod or > > kmod) for this (bcp43142) wireless network card? > > > https://bugzilla.rpmfusion.org/show_bug.cgi?id=2550 > Review request: wl-bcm43142-kmod - X86_64 Kernel module for Broadcom > wireless devices BCM43142 > > it match , is waiting for review in meantime you may test it . >
Thank Sérgio, now I'm subscribed to rpmfusion-user list. I have download these src.rpm > $ wget \ > http://dl.dropbox.com/u/25699833/rpmfusion/Rawhide/wl-bcm43142-kmod/wl-bcm43142-kmod-6.20.55.19-1.fc19.src.rpm > \ > http://dl.dropbox.com/u/25699833/rpmfusion/Rawhide/broadcom-wl-bcm43142/broadcom-wl-bcm43142-6.20.55.19-1.fc19.src.rpm then I have rebuild them with: > $ rpmbuild --rebuild \ > broadcom-wl-bcm43142-6.20.55.19-1.fc19.src.rpm \ > wl-bcm43142-kmod-6.20.55.19-1.fc19.src.rpm then I have install it with: > sudo yum install \ > rpmbuild/RPMS/noarch/broadcom-wl-bcm43142-6.20.55.19-1.fc18.noarch.rpm \ > rpmbuild/RPMS/x86_64/kmod-wl-bcm43142-6.20.55.19-1.fc18.x86_64.rpm \ > rpmbuild/RPMS/x86_64/akmod-wl-bcm43142-6.20.55.19-1.fc18.x86_64.rpm and test it. Work. But only if I connect to my and other router wifi with mode infrastructure. If I connect to my server firewall, witch share our wireless network card mode "ad-hoc" do not work. On another Notebook with another BCM network card and wl driver, I had rebuild the driver and use "make API=WEXT", in this mode i can connect to both mode. With wl-bcm43142 I could not try, but I think that would work. If you're interested, I can try in a few days. Do you have some suggest for me? Many thanks, and sorry for my bad English. -- Dario Lesca - sip:[email protected] (Inviato dal mio Linux Fedora18+Gnome3)
