Tks for your answer, but to be honest wasnt a big help.
The non-firewall stuff data is sent from hundreds of different scripts.. on
many different machines...and MRTG is not installed on the same machine as
RRDTOOL... so as you can imagine doing the migration from MRTG statistics to
RRDTOOL wasnt a question of hours.. but.. a question of months....
I dont know how MRTG works, since i only use RRDTOOL, but i know MRTG could
collect data from switchs/firewalls just reading a config file, so the
question was if RRDTOOL could do the same.
If RRDTOOL could not collect data from Firewalls/Switchs, i would expect
some directions on how to gather the data.....thats why i mentioned snmpget
command.
So if someone can point me some directions (urls maybe) i will be grateful.
Thank you.
-----Original Message-----
From: Paul C. Williamson [SMTP:[EMAIL PROTECTED]
Sent: quarta-feira, 30 de Janeiro de 2002 18:43
To: [email protected]; Nuno Emanuel Rodrigues
Subject: [rrd-users] Re: gathering statistics from
firewall/switch
I don't know if I want to go there, but how do you collect data now
for
the non-firewall stuff? You do realize MRTG provides 3 separate
functions -
data collection, data sotrage and data display, right? You can
replace
collection with something else, storage with RRDTool, and calls to
display via RRDTool with yet something else, right? Or, you can keep MRTG
as the collector, RRDTool as the storage medium, and some other tool
to call the display functionality from RRDTool...
You do know that to switch from MRTG to RRDTool as the back end
takes
a grand total (once RRDTool is installed) of maybe an hour,
depending on how
many configs you have to switch, right?
Use any collector (even MRTG) you want. Use one you write
yourself...
RRDTool does not care, as long as it gets the data every "step"
seconds...
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
