Hi Alex, I am running my cron every 5 minutes to perform rrdtool update. So where and when should I use rrdtool tune? Do I specify in the cron also?
Does the following help?? rrdtool tune data.rrd -i ds-name:U -a ds-name:U Please advise Thanks. Regards, Cheeyong At 11:40 AM 3/7/02 +0100, Alex van den Bogaerdt wrote: >Tay Chee Yong wrote: > > > I have implemented a large scale RRD plotting on all of my edge routers. I > > am plotting the rate-limit traffic for my customers, but however, whenever > > I change the value of the rate-limit (eg. from 1Mbps - 2Mbps), there will > > be a sudden spike in the RRD graph, like the one shown in the attachment. > >Could this be due to a counter reset? Have you set proper >max values (rrdtool tune) ? > > > And what does the 'P' in the graph means? > >Peta, which is 10^15. You are using 64-bit counters? > >HTH, >-- > __________________________________________________________________ > / [EMAIL PROTECTED] [EMAIL PROTECTED] \ >| work private | >| My employer is capable of speaking therefore I speak only for myself | >+----------------------------------------------------------------------+ >| Technical questions sent directly to me will be nuked. Use the list. | >+----------------------------------------------------------------------+ >| http://faq.mrtg.org/ | >| http://rrdtool.eu.org --> tutorial | >+----------------------------------------------------------------------+ -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
