Check http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/manual/rrdgraph.html for the -l, -u, -r and --units-exponent options. Be sure to read what the options do.
Try something like -l 0 -u 1000000 -r --units-exponent 6 Serge Maandag. -----Original Message----- From: Ruslan Spivak [mailto:[EMAIL PROTECTED] Sent: Saturday, September 14, 2002 12:18 PM To: rrd-users@list.ee.ethz.ch Subject: [rrd-users] how to get Mbits per second on graph Hello rrd-users, I'm newbie and have one question. I get statistics every five minutes using snmp from in and out interface of router (in octets). I want to have statistics of IN and OUT(in megabits per second) on one picture with vertical axe looking like this (from 0.0 to 1M): 1M| | 0.8M| | 0.6M| | 0.4M| | 0.2M| | 0.0| /usr/local/rrdtool/bin/rrdtool graph /tmp/router.png \ --start -3600 \ --imgformat=PNG \ DEF:inoctets=/usr/local/rrdtool/db/db.rrd:input:AVERAGE \ DEF:outoctets=/usr/local/rrdtool/db/db.rrd:output:AVERAGE \ CDEF:inmbits=inoctets,131072,/ \ CDEF:outmbits=outoctets,131072,/ \ AREA:inmbits#00FF00:"In traffic" \ LINE2:outmbits#0000FF:"Out traffic" But the result is not what I want. (It shows on vertical axe 10M and 20M) Your help is very, very appreciated. Best regards, Ruslan mailto:[EMAIL PROTECTED] -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi