Heh, I didn't understand what that was fully. I poached .5 off another example. Anyway, I reset it to 3600 and it took the create just fine.
Thanks :) -----Original Message----- From: Thomas Erskine [mailto:[EMAIL PROTECTED] Sent: Friday, May 23, 2003 12:43 PM To: Austin Swinney; rrd-users@list.ee.ethz.ch Subject: Re: [rrd-users] first time out, ERROR: can't parse argument At 14:16 2003-05-23, Austin Swinney wrote: >Hi, >I'm working on my-frirst-rrd. I'm creating a rrd for load percentages on APC >web/SNMP sets. > >MS1-4 are power strips on a single APC head. The range is 0 to 100 percent. > >The error I get is: > >ERROR: can't parse argument 'DS:MS1:GAUGE:0.5:1:100' I envy you your hardware that you can afford to poll at least once every half second. :-) The place you've put "0.5" is the "heartbeat". This is how often (in seconds) you must update the RRD to avoid having unknown data points added. I usually set it to 2*step so I can miss one update and rrdtool will fudge it. This is a hold-over from when my polling mechanism was too slow. The heartbeat has to be at least as large as the step. Where you set it depends on what you want rrdtool to do when you're not on time. >As far as I can tell from the docs, everything is right. Thoughts? > >rrdtool create loadpercent.rrd --start `date +%s` --step 300 \ >DS:MS1:GAUGE:0.5:0:100 \ >DS:MS2:GAUGE:0.5:0:100 \ >DS:MS3:GAUGE:0.5:0:100 \ >DS:MS4:GAUGE:0.5:0:100 \ >RRA:AVERAGE:0.5:1:24 \ >RRA:MIN:0.5:1:24 \ >RRA:MAX:0.5:1:24 \ >RRA:LAST:0.5:1:24 ; > >-- >Unsubscribe mailto:[EMAIL PROTECTED] >Help mailto:[EMAIL PROTECTED] >Archive http://www.ee.ethz.ch/~slist/rrd-users >WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Thomas Erskine <[EMAIL PROTECTED]> +1.613.591.8490 -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi