Excuse the terrible code formatting, seems Google Groups wanted to be
helpful.
Another try:
describe Scan do
describe Scan::XCPrettyReporterOptionsGenerator do
before(:all) do
// code that fails when executed on non-macOS
end
describe "xcpretty reporter options generation" do
it "generates options for the junit tempfile report required by scan",
requires_xcodebuild: true do
...
-J
Am Dienstag, 19. Dezember 2017 19:55:45 UTC+1 schrieb Jan P.:
>
> Yes, that works mostly like expected:
>
>
> 4704 examples, 21 failures, 154 pending
>
>
> and
>
> ...
> [18:39:20]: ▸ Pending: (Failures listed here are expected and do not
> affect your suite's status)
> [18:39:20]: ▸ 1) Fastlane Fastlane::EnvironmentPrinter contains main
> information about the stack
> [18:39:20]: ▸ # Requires Xcode to be installed which is not possible on
> this platform
> [18:39:20]: ▸ # ./fastlane/spec/env_spec.rb:28
> [18:39:20]: ▸ 2) Fastlane Fastlane::EnvironmentPrinter
> FastlaneCore::Helper.xcode_version cannot be obtained contains stack
> information other than Xcode Version
> [18:39:20]: ▸ # Requires Xcode to be installed which is not possible on
> this platform
> [18:39:20]: ▸ # ./fastlane/spec/env_spec.rb:47
> ...
>
>
> Awesome!
>
>
> The 21 failures are new though.
>
> I have a _spec.rb file with 21 examples that has a *before(:all)* that
> seems to have been filtered with my old solution, but with *skip *is now
> executed and fails:
>
> describe Scan do
> describe Scan::XCPrettyReporterOptionsGenerator do
> before(:all) do
> .. code that fails when executed on non-macOS ...
> end
>
> describe "xcpretty reporter options generation" do
> it "generates options for the junit tempfile report required by scan",
> requires_xcodebuild: true do
> ...
>
> Any idea what I can do about this?
> -J
>
>
>
> Am Dienstag, 19. Dezember 2017 19:26:17 UTC+1 schrieb Jan P.:
>>
>> Thanks for the quick answer.
>>
>> I missed "skipping examples" because I was so happy to have found
>> exclusion filters. Sounds like pretty much what I am looking for - even
>> better with the explicit reason I can set for skipping. Will try and report
>> back.
>>
>> Best,
>> Jan
>>
>>
>>
>> Am Dienstag, 19. Dezember 2017 17:37:56 UTC+1 schrieb Myron Marston:
>>>
>>> RSpec does not provide a way to get the number of examples that were
>>> excluded by its inclusion or exclusion filters, but there’s a different
>>> mechanism that will do what you want. Instead of filtering the examples
>>> (which excludes them from consideration entirely), you can skip them, which
>>> prevents the body of the example from running, sets the example’s status to
>>> :pending, will print the example in yellow in the formatter output, and
>>> will count the example in the summary total printed at the end (e.g. “500
>>> examples, 0 failures, 20 pending”). Normally, :skip metadata will cause
>>> an example to be skipped
>>> <https://www.google.com/url?q=https%3A%2F%2Frelishapp.com%2Frspec%2Frspec-core%2Fv%2F3-7%2Fdocs%2Fpending-and-skipped-examples%2Fskip-examples%23skipping-using-metadata&sa=D&sntz=1&usg=AFQjCNH2bA7au32CPocvg1H0M1Vzmcf5IQ>,
>>>
>>> but you’ve overwritten it to cause :skip to cause examples to be
>>> filtered out.
>>>
>>> Here’s my suggestion for how to wire this up.
>>>
>>> First, tag any examples that depend upon xcode with :uses_xcode (rather
>>> than :skip), e.g.:
>>>
>>> it "uses a feature of xcode", :xcode do
>>> # ...end
>>>
>>> it "does not use xcode at all" do
>>> # ...end
>>>
>>> Then use define_derived_metadata to automatically tag these examples
>>> with :skip if you are not running on OS X:
>>>
>>> # spec_helper.rbrequire 'rbconfig'
>>> RSpec.configure do |config|
>>> unless RbConfig::CONFIG['host_os'] =~ /darwin/
>>> config.define_derived_metadata(:xcode) do |meta|
>>> meta[:skip] = "Can only be run on OS X"
>>> end
>>> endend
>>>
>>> The “Can only be run on OS X” bit will be printed in the output as the
>>> reason the examples are pending.
>>>
>>> HTH,
>>> Myron
>>>
>>>
>>>
>>> On Tue, Dec 19, 2017 at 3:06 AM, Jan P. <[email protected]> wrote:
>>>
>>>> RSpec has this nice method to exclude individual tests/examples or
>>>> whole groups by using filter_run_excluding in the config, then tagging
>>>> the examples:
>>>>
>>>>
>>>> https://relishapp.com/rspec/rspec-core/v/3-7/docs/filtering/exclusion-filters
>>>>
>>>> RSpec.configure do |c|
>>>> c.filter_run_excluding :skip => trueend
>>>> RSpec.describe "something" do
>>>> it "does one thing" do
>>>> end
>>>>
>>>> it "does another thing", :skip => true do
>>>> endend
>>>>
>>>> "does one thing" will be checked,
>>>> "does another thing" will not.
>>>>
>>>>
>>>> We are using this, for example, to skip some tests depending on the
>>>> platform the test is run on by wrapping the c.filter_run_excluding
>>>> :skip => true in an if block:
>>>>
>>>> If Mac,
>>>> no exclusions, if Ubuntu,
>>>> exclude tests that do something with Xcode.
>>>>
>>>>
>>>> Right now the numbers of passing examples/test is just lower if the
>>>> exclusion filter is used, but it would be nice to see the actual number of
>>>> tests that are skipped.
>>>>
>>>> Is there a way to get the number of tests skipped by this method during
>>>> a test run?
>>>>
>>>> Thanks,
>>>>
>>>> Jan
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "rspec" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To post to this group, send email to [email protected].
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/rspec/3108ef8e-303d-425b-9b00-ab83dfec7633%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/rspec/3108ef8e-303d-425b-9b00-ab83dfec7633%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"rspec" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rspec/bcfd5676-92bd-4051-a3dd-5cb942784698%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
