Well, I hoped I could send my review before v4 but I was a bit too late... On 12/07/2016 at 18:16:37 +0100, Ben Dooks wrote : > This series adds support for the on SoC RTC driver on the > AMLogic Meson devices. The device-tree updates are not included > as they depend on the reset-controller support in -next. > > The series does not have any build dependencies, but does require > the reset controller and device-tree entries for the device-tree > files for the relevant boards. > > The series tested by myself on the ODroid-C1 board with a battery > pack attached. It has also been tested by Kevin Hilman. > > I will send the DT changes in a second series so that they can be > merged once the dependencies have been satisified. > > Changes since V3: > <1467748122-14833-1-git-send-email-ben.do...@codethink.co.uk> > - Added Kevin's tested by > > Changes since V1: > <1467039135-26588-1-git-send-email-ben.do...@codethink.co.uk> > > - Fixed checkpatch and sparse errors > - Fixed minor locking bug when writing static-control register > - Updated the code ordering in the rtc-meson.c driver > - Fixed alphanumeric ordering in on-cpu rtc block > - Added Rob Hering's ack for the DT binding documentation > - Added better description to the RTC driver header. > > Ben Dooks (2): > rtc: support for amlogic meson rtc > meson-rtc: add device-tree binding > > .../devicetree/bindings/rtc/rtc-amlogic.txt | 21 ++ > drivers/rtc/Kconfig | 9 + > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-meson.c | 349 > +++++++++++++++++++++ > 4 files changed, 380 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/rtc-amlogic.txt > create mode 100644 drivers/rtc/rtc-meson.c > > -- > 2.8.1 >
-- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
