On Wed, 11 Jan 2017, Enric Balletbo i Serra wrote: > From: Stephen Barber <smbar...@chromium.org> > > The EC can function as a simple RT, this patch adds the RTC related > definitions needed by the rtc-cros-ec driver. > > Signed-off-by: Stephen Barber <smbar...@chromium.org> > Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com> > --- > include/linux/mfd/cros_ec_commands.h | 8 ++++++++ > 1 file changed, 8 insertions(+)
Acked-by: Lee Jones <lee.jo...@linaro.org> > diff --git a/include/linux/mfd/cros_ec_commands.h > b/include/linux/mfd/cros_ec_commands.h > index 80d401d..73f7a62 100644 > --- a/include/linux/mfd/cros_ec_commands.h > +++ b/include/linux/mfd/cros_ec_commands.h > @@ -286,6 +286,9 @@ enum host_event_code { > /* Hang detect logic detected a hang and warm rebooted the AP */ > EC_HOST_EVENT_HANG_REBOOT = 21, > > + /* EC RTC event occurred */ > + EC_HOST_EVENT_RTC = 26, > + > /* > * The high bit of the event mask is not used as a host event code. If > * it reads back as set, then the entire event mask should be > @@ -790,6 +793,8 @@ enum ec_feature_code { > EC_FEATURE_USB_MUX = 23, > /* Motion Sensor code has an internal software FIFO */ > EC_FEATURE_MOTION_SENSE_FIFO = 24, > + /* EC has RTC feature that can be controlled by host commands */ > + EC_FEATURE_RTC = 27, > }; > > #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32)) > @@ -1682,6 +1687,9 @@ struct ec_response_rtc { > #define EC_CMD_RTC_SET_VALUE 0x46 > #define EC_CMD_RTC_SET_ALARM 0x47 > > +/* Pass as param to SET_ALARM to clear the current alarm */ > +#define EC_RTC_ALARM_CLEAR 0 > + > > /*****************************************************************************/ > /* Port80 log access */ > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.