Hi,
On Fri, Nov 10, 2017 at 10:55:52PM +0100, Enric Balletbo i Serra wrote:
> From: Stephen Barber <smbar...@chromium.org>
>
> The EC can function as a simple RT, this patch adds the RTC related
> definitions needed by the rtc-cros-ec driver.
>
> Signed-off-by: Stephen Barber <smbar...@chromium.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
> Acked-by: Lee Jones <lee.jo...@linaro.org>
> Acked-by: Benson Leung <ble...@chromium.org>
Reviewed-by: Brian Norris <briannor...@chromium.org>
I guess this is waiting to get merged by an RTC maintainer, since it's a
dependency for the RTC driver in patch 2? Alessandro or Alexandre, any
thoughts?
Brian
> ---
> include/linux/mfd/cros_ec_commands.h | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/include/linux/mfd/cros_ec_commands.h
> b/include/linux/mfd/cros_ec_commands.h
> index 2b16e95..c6046a2 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -291,6 +291,9 @@ enum host_event_code {
> /* EC desires to change state of host-controlled USB mux */
> EC_HOST_EVENT_USB_MUX = 28,
>
> + /* EC RTC event occurred */
> + EC_HOST_EVENT_RTC = 26,
> +
> /*
> * The high bit of the event mask is not used as a host event code. If
> * it reads back as set, then the entire event mask should be
> @@ -799,6 +802,8 @@ enum ec_feature_code {
> EC_FEATURE_USB_MUX = 23,
> /* Motion Sensor code has an internal software FIFO */
> EC_FEATURE_MOTION_SENSE_FIFO = 24,
> + /* EC has RTC feature that can be controlled by host commands */
> + EC_FEATURE_RTC = 27,
> };
>
> #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
> @@ -1709,6 +1714,9 @@ struct ec_response_rtc {
> #define EC_CMD_RTC_SET_VALUE 0x46
> #define EC_CMD_RTC_SET_ALARM 0x47
>
> +/* Pass as param to SET_ALARM to clear the current alarm */
> +#define EC_RTC_ALARM_CLEAR 0
> +
>
> /*****************************************************************************/
> /* Port80 log access */
>
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups
"rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rtc-linux+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
