Philip N Daly wrote:
>
> > setserial /dev/ttyS0 uart none
> > insmod rt_com
>
> what happens when you try putting the following *at the end* of your rc.local:
>
> /bin/setserial /dev/ttyS0 uart none
> /sbin/insmod -sfv /opt/rtl/modules/rt_com.o
>
> (or whatever your rt_com module is called and located)?
>
> +==================================================================+
> Phil Daly, NOAO/AURA, 950 N. Cherry Avenue, Tucson AZ 85719, U S A
> E-mail: [EMAIL PROTECTED] V-mail: (520) 318 8438 Fax: (520) 318 8360
>
> -- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> --
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/rtlinux/
Haven't tried that yet but I'll try ot out today. I have found that
doing things twice in rc.local does work. The first attempt always fails
while the second one works. THis is also true if you type the commands
manually.
Theo
--
Dr. Theo ten Brummelaar
The CHARA Array-Georgia State University-Mount Wilson Observatory
http://www.chara.gsu.edu/~theo Ph: 626-796-5405 Fax: 626-796-6717
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
