hello all,
i am writing a device driver for an eib (European Instalation Bus) device.
It communicates with a serial port. I wrote my own module which I load with
rt_com and communicate with the device (19200 8n1)- it sends the computer a
byte and the computer sends it back. The problem is that I want to make the
response time of the serial device smaller.
see i connected an osciloscope to the serial port and measured delay of 2.2
miliSecs between the time the driver gets the byte and send the answer. I
need to bring the time down to a bit less than 150 microSecs.
Hope that you can help me.
evgeni
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
