Waouhh! How is it possible...? I haven't any services at all. Only for the kernel, it takes about 6-7 secs to complete from start to init... >>> [EMAIL PROTECTED] 06/07/01 02h39 >>> What Service you open? my embeded box open within 3secs which is a 586 and 16mb box as yours? ----- Original Message ----- From: "Marc LE DOUARAIN" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, July 05, 2001 10:41 PM Subject: [rtl] Time to boot Linux,RTLinux,launching real-time application > Hello everyone, > > We've just put our RTLinux application on an embedded card, and our first surprise >was the quite long time before all is running. There is about 20secs. Is it normal? >Are there some ways to optimize things (kernel options, Bios,...) ? > If you have some times/benchmarks, it could be interresting. > Our card is a 5x86/75 mhz with a 16MB DiskOnModule. > We use Lilo, Kernel2.2.18, RTlinux 3.0. > > Thanks. > > > -- [rtl] --- > To unsubscribe: > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] > -- > For more information on Real-Time Linux see: > http://www.rtlinux.org/ > > -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] -- For more information on Real-Time Linux see: http://www.rtlinux.org/ -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] -- For more information on Real-Time Linux see: http://www.rtlinux.org/
