Are you using the old v1 API? JOAQUIN HERRADA ([EMAIL PROTECTED]) wrote: > > I've downloaded the RTL Linux 3.0 with a prepatched kernel (2.2.18 rtl). > I patched the kernel with a diskonchip driver because i'm developing a embedded > system. The problem is that after running my application 30' the kernel shutdowns in >the way: > > divide error: 0000 > CPU: 0 > EIP: 0010:[<c104d8be>] > EFLAGS: 00010246 > eax: ... > esi: ... > ds: 0018 es: 0018 ss: 0018 > Process: (pid: 0, process nr: 0, stackpage = c0b7d000) > Stack: 00000000, ... > Call Trace: [<... > Code: .. > Aiee, killing interrupt handler > Kernel panic: Attempted to kill the idle task! > > or directly with a reset. > > > The software seems to run ok, i haven't found any potencial divide by zero in the >code, > it doesn't lack the memory, and always explotes after 30 minutes. Firstly i thought >that was the > power management but i disconnected this feature from the bios with the same results >and the > kernel is compiled without APM support. > > I've take a look at the vmalloc_fix in the ftp site, but doesn't seems to be used >with the kernel 2.2.18 or is already patched ? > > Can someone help me? > Thanks. > > Joaquin Herrada ([EMAIL PROTECTED]) > R&D software engineer > IAMC - Cirsa Corporation > Avda. del Valles, 314. Poligon Industrial "Els Bellots" > 08227 TERRASSA Barcelona Spain > Pho: 34 3 736 01 00 (ext:149) > Fax: 34 3 783 90 38 > > -- [rtl] --- > To unsubscribe: > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] > -- > For more information on Real-Time Linux see: > http://www.rtlinux.org/rtlinux/ ----- End of forwarded message from [EMAIL PROTECTED] ----- -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] -- For more information on Real-Time Linux see: http://www.rtlinux.org/
