Hi Hinds/all, This question is not directly to RTLinux but I will appreciate help from anyboby's. When I insmod for the PCMCIA (on desktop PC) card the Kernel display "Lost interrupt" and this message is not from any of the modules that I install. After this message I can not format nor mount on to the Compat Memory Card. The modules in-use are pcmcia_core.o, ds.o, i82365.o and ide_cs.o. Below is the kernel's message Jul 20 16:07:28 localhost kernel: Intel PCIC probe: Jul 20 16:07:28 localhost kernel: Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 18, mem 0x68000000, 1 socket Jul 20 16:07:28 localhost kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34] Jul 20 16:07:28 localhost kernel: ISA irqs (default) = 3,4,5,7,9,14 polling interval = 1000 ms Jul 20 16:07:28 localhost cardmgr[645]: starting, version is 3.1.8 Jul 20 16:07:28 localhost cardmgr[645]: watching 1 sockets Jul 20 16:07:28 localhost kernel: cs: IO port probe 0x1000-0x17ff: clean. Jul 20 16:07:28 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x1f0-0x1f7 0x290-0x297 0x378-0x37f 0x3f0-0x44f 0x4d0-0x4d7 Jul 20 16:07:28 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. Jul 20 16:07:29 localhost cardmgr[645]: initializing socket 0 Jul 20 16:07:29 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jul 20 16:07:29 localhost cardmgr[645]: socket 0: ATA/IDE Fixed Disk Jul 20 16:07:29 localhost cardmgr[645]: executing: 'insmod /lib/modules/2.2.14-rtl2.2/pcmcia/ide_cs.o' Jul 20 16:07:30 localhost kernel: hda: Hitachi CV 7.1.1, ATA DISK drive Jul 20 16:07:30 localhost kernel: ide0 at 0x100-0x107,0x10e on irq 5 Jul 20 16:07:30 localhost kernel: hda: Hitachi CV 7.1.1, 7MB w/1kB Cache, CHS=246/2/32 Jul 20 16:07:30 localhost kernel: hda:<7>VFS: Disk change detected on device ide1(22,0) Jul 20 16:07:40 localhost kernel: hda: lost interrupt <==== Jul 20 16:08:10 localhost last message repeated 3 times Jul 20 16:08:10 localhost kernel: hda1 Jul 20 16:08:10 localhost kernel: ide_cs: hda: Vcc = 3.3, Vpp = 0.0 Jul 20 16:08:10 localhost cardmgr[645]: executing: './ide start hda' Jul 20 16:08:11 localhost kernel: hda:<7>VFS: Disk change detected on device ide1(22,0) Jul 20 16:08:21 localhost kernel: hda: lost interrupt <==== Jul 20 16:08:31 localhost kernel: hda: lost interrupt <==== Please I want to know where this message comes from and if possible how to tackle the problem. Regards, Mukaila -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] --- For more information on Real-Time Linux see: http://www.rtlinux.org/rtlinux/

Reply via email to