Dear Yodaiken, I also have the same problem, do you have an example program module ? Adolf > ---------- > From: [EMAIL PROTECTED][SMTP:[EMAIL PROTECTED]] > Sent: Monday, August 07, 2000 8:56 PM > To: Mukaila olundegun > Cc: [EMAIL PROTECTED] > Subject: Re: [rtl] How to Pass PCI IRQ to Linux > > > If your RT threads poll the device they can then pretend there was > an interrupt and send it to Linux via > pthread_kill(pthread_linux(),RTL_SIG_LINUX_IRQ+ k) > where "k" is the irq number you want to send. > > On Mon, Aug 07, 2000 at 08:42:30PM +0900, Mukaila olundegun wrote: > > Hello all, > > > > I am using an Old PCI device that does not generate IRQ. How can I pass an > > irq to Linux for the PCI device. > > > > Thanks in advance. > > > > Mukaila > > > > > > -- [rtl] --- > > To unsubscribe: > > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR > > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] > > --- > > For more information on Real-Time Linux see: > > http://www.rtlinux.org/rtlinux/ > > -- > --------------------------------------------------------- > Victor Yodaiken > Finite State Machine Labs: The RTLinux Company. > www.fsmlabs.com www.rtlinux.com > > -- [rtl] --- > To unsubscribe: > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] > --- > For more information on Real-Time Linux see: > http://www.rtlinux.org/rtlinux/ > -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] --- For more information on Real-Time Linux see: http://www.rtlinux.org/rtlinux/