Ok got the s3virge in my comp again , and that also works normal with
XFree 3.3.6.
So when nobody else sees the kind of problems i have with XFree 4.0.1
the only things i can
think of is that the better acceleration in XFree 4.0.1 makes some weird
hardware "bug" visible.
So maybe XFree 4.0.1 is only the messanger :-) So someone out there that
has a Athlon and a VIA KT133
chipset and XFree 4 that wants to try RT-Linux/RTAI ?
- Erwin
Erwin Rol wrote:
>
> Hello all,
>
> well i gave up on XFRee 4.0.1 cause after changing about every BIOS
> setting, recompiling X with several mentioned improvements, switching
> video cards, switching RTAI->RTL and aback again, selectively disabling
> XAA parts, i still
> had peaks of 1msec and more in mmy latency tests.
>
> So now i got XFree 3.3.6 (standard RH6.2 rpms) again. First thing i
> noticed on the G400 is that it is slower than
> XFree 4.0.1 (altough faster than XFree 4.0.1 without acceleration). The
> latency is down to its normal level of 20usec
> peaks and about 7usec normal. (i will try the s3Virge later , cause than
> i have to rebuild my comp again :-/)
>
> I asume that the 3.3.x serie will not be developed on anymore so
> sommetime next year users will be getting linux
> distributions with XFree 4 on it and new cards won't be supported
> anymore by XFree 3. So i think all ppl using
> RT-linux/RTAI will have to be very carefull when switching to XFRee 4.
> Also i hope some other ppl are willing
> to try if they have the same problems with XFree 4.0.1 as i have.
> (Michael did you tried X3 or X4 with that
> nvidia card ? ).
>
> Well thanx to everybody that helped, and gave advice and so on.
>
> I have the bad feeling this won't be the last we hear from XFree 4:-/
>
> - Erwin
>
> [EMAIL PROTECTED] wrote:
> >
> > Ok.
> > A) disable PCI retry.
> > B)
> > Bool
> > xf86DisableInterrupts()
> > {
> > if (!ExtendedEnabled)
> > #if !defined(__mc68000__) && !defined(__powerpc__) &&
> > !defined(__sparc__) && !defined(__mips__)
> > if (iopl(3) || ioperm(0, 1024, 1))
> > ^^^^^^^
> > replace with
> > 0
> >
> > Recompile X.
> >
> > Michael has tried with nvidia and no problem.
> >
> > On Sat, Nov 25, 2000 at 01:35:59AM +0100, Erwin Rol wrote:
> > > OK here is what i have tried in the last few days.
> > > The following part where the same in all the tests.
> > > XFree 4.0.1
> > > Athlon TB 800, 128MB PC133, ASUS K7V MB,
> > >
> > > 1)
> > > with a s3virge based card
> > > RTAI 1.5 on a 2.2.16 kernel
> > >
> > > running the latency example which resulted in in peaks of 50msec latency
> > > when i for exmple
> > > pressed enter in a console window (causeing it to scroll one line or
> > > more) also heavy X by dragging
> > > windows as fast as posible caused also latency.
> > >
> > > No change in the pci setup like sugested helped, appart from not using
> > > acceleration.
> > >
> > > 2)
> > > with a Matrox G400MAX
> > > RTAI 1.5 on a 2.2.16 kernel
> > >
> > > same latency example wich was way beter , no more problem with dragging
> > > and enter presses. But when i do a ls -Rl
> > > in a console window latency jumps up to 100-500usec with peaks at
> > > 1.5msec. When i minimize that window the latency goes
> > > back to 3-15usec with peaks of 30usec.
> > >
> > > 3)
> > > with a Matrox G400MAX
> > > RTL 3.0 pre9 on a 2.2.17 kernel
> > >
> > > the ./examples/measurements test results in the same max latencies as
> > > with RTAI.
> > >
> > > all 3 tests i also ran in failsafe mode with only xterminals (no gnome,
> > > WM etc.)
> > >
> > > sO the big teast left is trying all that with FXRee 3.3.6 , which i will
> > > have to install again first :-/ but i don't see
> > > a othe choice to rule out the hardware. An other thing would be when
> > > someone else could reproduce it , the person
> > > on comp.realtime sounded like he had the same problem.
> > >
> > > If there are any test i should run , or something else there is that you
> > > want to know , just give a shout.
> > >
> > > - eRwin (and i blamed Paolo for calling me Edwin , sory Paolo :-)
> > >
> > >
> > > [EMAIL PROTECTED] wrote:
> > > >
> > > > On Fri, Nov 24, 2000 at 09:04:48PM +0100, Erwin Rol wrote:
> > > > > The thing that worries me a bit is the fact that now 3 XFree 4.0.1
> > > > > drivers cause problems
> > > > > for RT-Linux , the nVidia, the mga and the s3virge one.
> > > >
> > > > Edwin:
> > > > I had the impression that you were running RTAI. While this may be
> > > > a harware/low-levelX problem, I'd like to get a precise bug report
> > > > before we start speculating about X4 and the PCI bus.
> > > > Version of RTLinux
> > > > Version of Linux
> > > > Hardware
> > > > Test code.
> > > >
> > > >
> > > >
> > > >
> > > > >
> > > > > I would really like to see someone else try Xfree 4.0.1 with RT-linux (i
> > > > > know it is a pain when you have
> > > > > a distribution with XFree 3.3.x :-/ )
> > > > >
> > > > > OK will keep you posted on what else i find out,
> > > > >
> > > > > Erwin
> > > > >
> > > > >
> > > > > Michel D�nzer wrote:
> > > > > >
> > > > > > Erwin Rol wrote:
> > > > > >
> > > > > > > > - Try "pci_burst" and "pci_retry" in the Device section. (Both on.)
> > > > > > > done that.
> > > > > >
> > > > > > What if you disable PCI retry? I'd have imagined that the PCI bus might
>stall
> > > > > > when the CPU tries to access a register while the accelerator is doing a
> > > > > > time-consuming task.
> > > > > >
> > > > > > Please forgive me if this is completely off...
> > > > > >
> > > > > > Michel
> > > > > >
> > > > > > --
> > > > > > Earthling Michel D�nzer (MrCooper) \ CS student and free software
>enthusiast
> > > > > > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and The DRI
>Project
> > > > > -- [rtl] ---
> > > > > To unsubscribe:
> > > > > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> > > > > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> > > > > ---
> > > > > For more information on Real-Time Linux see:
> > > > > http://www.rtlinux.org/rtlinux/
> > > >
> > > > --
> > > > ---------------------------------------------------------
> > > > Victor Yodaiken
> > > > Finite State Machine Labs: The RTLinux Company.
> > > > www.fsmlabs.com www.rtlinux.com
> > > -- [rtl] ---
> > > To unsubscribe:
> > > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> > > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> > > ---
> > > For more information on Real-Time Linux see:
> > > http://www.rtlinux.org/rtlinux/
> >
> > --
> > ---------------------------------------------------------
> > Victor Yodaiken
> > Finite State Machine Labs: The RTLinux Company.
> > www.fsmlabs.com www.rtlinux.com
> _______________________________________________
> Xpert mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xpert
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
---
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
