Hi! Similar problem, too. The compiling process of kernel 2.4.18 works fine on my new Redhat 7.3 system. I've patched both RTLinux 3.1 and Linux 2.4.18 with the patch that you sent to the "gearheart" directory under the link. After rebooting into RTLinux. The failure message of "ext3 file system is not supported by the current system" still shows up.
I have no problem seeing all files on the hard drive after reboot. However, cannot load network card driver and sound card driver. When using command "uname -r" to check kernel version. It shows 2.4.4-rtl. Is this correct? How can I do to fix this "ext3 file system" problem to avoid the booting failure message? Please advise. Thanks! Daniel --------- Original Message ---------------------------------------------------- It's there now: ftp://ftp.fsmlabs.com/pub/rtlinux/contrib/gearheart/ We'll also be making a BitKeeper archive of Open RTLinux available soon for people to work with. } As you requested I took Zdenek Kabelac's 2.4.19-pre8 SMP patch, applied it } to 2.4.18, made the necessary fixes (for proper operation with 2.4.18), and } have sent it to Cort to be placed on the fsmlabs ftp. } } I have tested it on my P3 1.2gig laptop, and it works well (I have only } tested it for a couple of hours so far). But I haven't tested it on my dual } P3 SMP box(at home) yet. SO proceed with caution... } } Regards! } Todd } } -----Original Message----- } From: Der Herr Hofrat [mailto:[EMAIL PROTECTED]] } Sent: Wednesday, June 12, 2002 11:34 AM } To: [EMAIL PROTECTED] } Subject: Re: [rtl] RTlinux-3.1 on Redhat 7.2 with ext3 filesystem } } } > Hello Everybody: } > } > I have recently upgraded from RTlinux-3.1 running on Redhat 7.1 to Redhat } > 7.1 with ext3 support. I am facing problem with ext3 file } > system, for its unable to mount all files system like /usr, /etc/ , /var } > ,etc. when trying to load rtlinux-3.1 boot image( rtzImage). I understand } I } > need to update /etc/fstab as I understood from newsgroup. } > } > Also to make a note I have compiled rtlinux-3.1 with linux-2.4.4 only. } } It will work with 2.4.4 if you need 2.4.7 check for the patches against } 2.4.7 in ftp://ftp.fsmlabs.at/pub/rtlinux/contrib/kabelac/patch_rtl_2.4.7.gz } } There are known problems with ext3/reiserfs when runing on systems that are } optimized for athlon/Duron - if you do have optimization turned on this may } be your problem - to check simply recompile the kernel as pentium and see } if that does it. } } hofrat _______________________________________________ Rtl mailing list [EMAIL PROTECTED] http://www2.fsmlabs.com/mailman/listinfo.cgi/rtl
