Thanks for the sample code Kris. It seems that the problem is not with the Timer itself, but with WorkItemHadler !
(Complete code - extended version of your code - is attached). Adding a "Log" work item between START and the first Action breaks the code. If I remove the Log item, the flow works as expected. Here is the code that runs in executeWorkItem: logger.info("=== message from flow ===>> "+ workItem.getParameter("Message")); manager.completeWorkItem(workItem.getId(), null); logger.info("Work item completed!"); the 2nd log message is not displayed! Any ideas what am I doing wrong? Second issue: The process does not end! - I took Kris's code and ran it. Even after the work flow completed, the process was still alive! (End Node's Terminate Property *is* set to "true"). Thanks Ajay -----Original Message----- From: Kris Verlaenen [mailto:kris.verlae...@cs.kuleuven.be] Sent: Friday, June 05, 2009 5:08 PM To: Rules Users List; Gautam, Ajay, GBM Cc: rules-users@lists.jboss.org Subject: Re: [rules-users] Timer does not return! It's difficult to figure out what's going on without looking at the process itself, but your code seems to be fine. If you run the engine in reactive mode (using fireUntilHalt), it should automatically fire the action associated with the timer once it goes off. Note that, if you are not running in reactive mode, the timer is also triggered (it doesn't just run through), but it'll wait to execute the associated action until fireAllRules is called. For example, this simple process is a timer followed by an action writing out when the timer is being triggered. <?xml version="1.0" encoding="UTF-8"?> <process xmlns="http://drools.org/drools-5.0/process" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:schemaLocation="http://drools.org/drools-5.0/process drools-processes-5.0.xsd" type="RuleFlow" name="ruleflow" id="com.sample.ruleflow" package-name="com.sample" > <header> </header> <nodes> <start id="1" name="Start" x="16" y="16" width="80" height="40" /> <timerNode id="4" name="Timer" x="128" y="16" width="80" height="40" delay="2000" /> <actionNode id="2" name="Action" x="240" y="16" width="80" height="40" > <action type="expression" dialect="mvel" >System.out.println("Executing");</action> </actionNode> <end id="3" name="End" x="352" y="16" width="80" height="40" /> </nodes> <connections> <connection from="1" to="4" /> <connection from="4" to="2" /> <connection from="2" to="3" /> </connections> </process> By using the following code, the action is written out immediately when the timer triggers (after 2 seconds): public static final void main(String[] args) { try { // load up the knowledge base KnowledgeBase kbase = readKnowledgeBase(); final StatefulKnowledgeSession ksession = kbase.newStatefulKnowledgeSession(); new Thread(new Runnable() { public void run() { ksession.fireUntilHalt(); } }).start(); // start a new process instance ksession.startProcess("com.sample.ruleflow"); } catch (Throwable t) { t.printStackTrace(); } } The following code doesn't use reactive mode, so the action associated with the timer is only triggered during the next fireAllRules (after 4 seconds). public static final void main(String[] args) { try { // load up the knowledge base KnowledgeBase kbase = readKnowledgeBase(); final StatefulKnowledgeSession ksession = kbase.newStatefulKnowledgeSession(); // start a new process instance ksession.startProcess("com.sample.ruleflow"); Thread.sleep(4000); ksession.fireAllRules(); } catch (Throwable t) { t.printStackTrace(); } } Hope this clears up the situation a little more. If you still have problems integrating timers in your process, could you send a standalone example (containing both the process xml and the Java code)? Thx, Kris Quoting ajay.gau...@rbs.com: > I have a timer in my code that does not return. It just hangs the > process (with no CPU activity). > > Any idea what may be causing this? > > The timer delay is 2000 ms. Based on the docs, here are code > snippets: > > > ....... > ksession = kbase.newStatefulKnowledgeSession(); > new Thread(new Runnable() { > public void run() { > ksession.fireUntilHalt(); > } > }).start(); > ........ > final RFQRequest req = createRequest(); > parameters.put("rfqIn", req); > ksession.setGlobal("reqTag", req.getTag()); > ksession.startProcess("com.rbs.gbm.pm.RFQ-WorkFlow", parameters); > ........ > > If I remove the fireUntilHalt thread, the timer is not triggered at > all. The flow just passes through it lilke its not even there. > > Any help / info / pointers will be appreciated. > > Thanks > > Ajay > > *****Please note that my email address may have changed. For all > future correspondence, please use this address***** > > > ********************************************************************This > message (including any attachments) is confidential and/or > privileged. It is to be used by the intended recipients only. If > you have received it by mistake please notify the sender by return > e-mail and delete this message from your system. Any unauthorized > use or dissemination of this message in whole or in part is > strictly prohibited. Please note that e-mails are inherently > insecure and susceptible to change. The Royal Bank of Scotland > Group, plc ("RBS") and its US subsidiaries, and affiliates and > subsidiary undertakings, including but not limited to, RBS plc New > York and Connecticut Branches, RBS Securities Inc., ABN AMRO Bank > N.V. New York and Chicago Branches and, ABN AMRO Incorporated, > Citizens Financial Group, Inc. and RBS Citizens, N.A., shall not be > liable for the improper or incomplete transmission of the > information contained in this communication or Attachment nor for > any delay in its receipt or damage to your system. RBS does not > guarantee that the integrity of this communication has been > maintained nor that this communication is free of viruses, > interceptions or interference. RBS and its subsidiaries and > affiliates do not guarantee the accuracy of any email or > attachment, that an email will be received or that RBS or its > affiliates and subsidiaries will respond to an email. > > RBS makes no representations that any information contained in this > message (including any attachments) are appropriate for use in all > locations or that transactions, securities, products, instruments > or services discussed herein are available or appropriate for sale > or use in all jurisdictions, or by all investors or counterparties. > Those who utilize this information do so on their own initiative > and are responsible for compliance with applicable local laws or > regulations.******************************************************************** > > _______________________________________________ > rules-users mailing list > rules-users@lists.jboss.org > https://lists.jboss.org/mailman/listinfo/rules-users > Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
MyTimerTest.java
Description: MyTimerTest.java
my-timer.rf
Description: my-timer.rf
_______________________________________________ rules-users mailing list rules-users@lists.jboss.org https://lists.jboss.org/mailman/listinfo/rules-users