Got it, I think is my switch issue. Thanks, Jalee
於 10/31/14, 15:11，"Yusuke Iwase" <iwase.yusu...@gmail.com> 寫道: >Hi, > >Please check the mail address to Ryu-devel. > ryu-devel@lists.sourceforge.net > >On 2014年10月31日 01:58, Jalee Lee wrote: >> Dear All, >> I have a question about get flow stats, I use two flow entry for this >>time test, one is L2+3+4 flow entry another flow entry have include MPLS >>function. >> I found out get L2+3+4 flow entry is ok, but get include MPLS function >>will be fail. >> In attached file, you can saw switch had output message to controller, >>can you help verify this issue? >> Thanks, >> >> >> Jalee >> >> ========================================== log >> >> lab@lab-hackertools:~$ >> >> lab@lab-hackertools:~$ curl -X GET http://10.1.25.52:8080/stats/flow/9 >> >> {"9": [{"actions": ["SET_FIELD: {eth_dst:0e:00:5e:0a:0a:0a}", >>"SET_FIELD: {eth_src:00:08:11:0a:0a:0a}", "SET_FIELD: {vlan_pcp:1}", >>"SET_FIELD: {vlan_vid:102}", "SET_FIELD: {ipv4_src:100.0.0.1}", >>"SET_FIELD: {ipv4_dst:200.0.0.1}", "SET_FIELD: {tcp_src:3333}", >>"SET_FIELD: {tcp_dst:4444}", "OUTPUT:2", "OUTPUT:48"], "idle_timeout": >>0, "cookie": 1, "packet_count": 0, "hard_timeout": 0, "byte_count": 0, >>"length": 312, "duration_nsec": 750505000, "priority": 23999, >>"duration_sec": 19, "table_id": 0, "flags": 0, "match": {"dl_type": >>2048, "nw_dst": "40.0.0.1", "vlan_pcp": 0, "dl_src": >>"00:90:22:22:22:22/ff:ff:ff:ff:ff:ff", "nw_proto": 6, "tp_dst": 22222, >>"tp_src": 11111, "dl_dst": "00:90:11:11:11:11/ff:ff:ff:ff:ff:ff", >>"dl_vlan": 4095, "nw_src": "30.0.0.1", "in_port": >>46}}]}lab@lab-hackertools:~$ >> >> lab@lab-hackertools:~$ >> >> lab@lab-hackertools:~$ >> >> lab@lab-hackertools:~$ curl -d '{"cookie": "1", >>> "dpid": "9", >>> "priority": "1024", >>> "match": {"in_port": "24", >>> "eth_type": 0x800}, >>> "actions": [{"type":"PUSH_MPLS","ethertype":0x8847}, >>> {"type":"SET_FIELD", "field": "mpls_label", >>>"value":16}, >>> {"type": "SET_FIELD", "field":"eth_dst", >>>"value":"00:00:00:11:22:33"}, >>> {"type": "OUTPUT", "port": "26"}]}' >>>http://10.1.25.52:8080/stats/flowentry/add > > >Hmm, I could add the flow entry like as follows. > >========================================================================== >================== >Ryu: ryu 3.14 >Switch: (Open vSwitch) 2.3.90 >========================================================================== >================== >$ curl -d '{ >> "dpid": "9", >> "actions": [ >> {"type": "SET_FIELD", "field": "eth_dst", "value": >>"0e:00:5e:0a:0a:0a"}, >> {"type": "SET_FIELD", "field": "eth_src", "value": >>"00:08:11:0a:0a:0a"}, >> {"type": "SET_FIELD", "field": "vlan_pcp", "value": 1}, >> {"type": "SET_FIELD", "field": "vlan_vid", "value": >>4198}, >> {"type": "SET_FIELD", "field": "ipv4_src", "value": >>"100.0.0.1"}, >> {"type": "SET_FIELD", "field": "ipv4_dst", "value": >>"200.0.0.1"}, >> {"type": "SET_FIELD", "field": "tcp_src", "value": >>3333}, >> {"type": "SET_FIELD", "field": "tcp_dst", "value": >>4444}, >> {"type": "OUTPUT", "port": 2}, >> {"type": "OUTPUT", "port": 48} >> ], >> "byte_count": 0, >> "cookie": 1, >> "cookie_mask": 1, >> "match": { >> "dl_dst": "00:90:11:11:11:11/ff:ff:ff:ff:ff:ff", >> "dl_src": "00:90:22:22:22:22/ff:ff:ff:ff:ff:ff", >> "dl_type": 2048, >> "dl_vlan": 4095, >> "in_port": 46, >> "nw_dst": "40.0.0.1", >> "nw_proto": 6, >> "nw_src": "30.0.0.1", >> "tp_dst": 22222, >> "tp_src": 11111, >> "vlan_pcp": 0 >> }, >> "priority": 23999 >> }' http://localhost:8080/stats/flowentry/add >$ >$ curl -X GET http://localhost:8080/stats/flow/9 >{"9": [{"actions": ["SET_FIELD: {eth_dst:0e:00:5e:0a:0a:0a}", "SET_FIELD: >{eth_src:00:08:11:0a:0a:0a}", "SET_FIELD: {vlan_pcp:1}", "SET_FIELD: >{vlan_vid:4198}", "SET_FIELD: {ipv4_src:100.0.0.1}", "SET_FIELD: >{ipv4_dst:200.0.0.1}", "SET_FIELD: {tcp_src:3333}", "SET_FIELD: >{tcp_dst:4444}", "OUTPUT:2", "OUTPUT:48"], "idle_timeout": 0, "cookie": >1, "packet_count": 0, "hard_timeout": 0, "byte_count": 0, "length": 304, >"duration_nsec": 13000000, "priority": 23999, "duration_sec": 0, >"table_id": 0, "flags": 0, "match": {"dl_type": 2048, "nw_dst": >"40.0.0.1", "vlan_pcp": 0, "dl_src": "00:90:22:22:22:22", "nw_proto": 6, >"tp_dst": 22222, "tp_src": 11111, "dl_dst": "00:90:11:11:11:11", >"dl_vlan": 4095, "nw_src": "30.0.0.1", "in_port": 46}}]}$ >$ >$ curl -d '{"cookie": "1", >> "dpid": "9", >> "priority": "1024", >> "match": {"in_port": "24", >> "eth_type": 2048}, >> "actions": [{"type":"PUSH_MPLS","ethertype":34887}, >> {"type":"SET_FIELD", "field": "mpls_label", >>"value":16}, >> {"type": "SET_FIELD", "field":"eth_dst", >>"value":"00:00:00:11:22:33"}, >> {"type": "OUTPUT", "port": "26"}]}' >>http://localhost:8080/stats/flowentry/add >$ >$ >$ curl -X GET http://localhost:8080/stats/flow/9 >{"9": [{"actions": ["PUSH_MPLS:34887", "SET_FIELD: {mpls_label:16}", >"SET_FIELD: {eth_dst:00:00:00:11:22:33}", "OUTPUT:26"], "idle_timeout": >0, "cookie": 1, "packet_count": 0, "hard_timeout": 0, "byte_count": 0, >"length": 136, "duration_nsec": 863000000, "priority": 1024, >"duration_sec": 0, "table_id": 0, "flags": 0, "match": {"dl_type": 2048, >"in_port": 24}}, {"actions": ["SET_FIELD: {eth_dst:0e:00:5e:0a:0a:0a}", >"SET_FIELD: {eth_src:00:08:11:0a:0a:0a}", "SET_FIELD: {vlan_pcp:1}", >"SET_FIELD: {vlan_vid:4198}", "SET_FIELD: {ipv4_src:100.0.0.1}", >"SET_FIELD: {ipv4_dst:200.0.0.1}", "SET_FIELD: {tcp_src:3333}", >"SET_FIELD: {tcp_dst:4444}", "OUTPUT:2", "OUTPUT:48"], "idle_timeout": 0, >"cookie": 1, "packet_count": 0, "hard_timeout": 0, "byte_count": 0, >"length": 304, "duration_nsec": 906000000, "priority": 23999, >"duration_sec": 0, "table_id": 0, "flags": 0, "match": {"dl_type": 2048, >"nw_dst": "40.0.0.1", "vlan_pcp": 0, "dl_src": "00:90:22:22:22:22", >"nw_proto": 6, "tp_dst": 22222, "tp_sr > >c": 11111, "dl_dst": "00:90:11:11:11:11", "dl_vlan": 4095, "nw_src": >"30.0.0.1", "in_port": 46}}]}$ >$ >========================================================================== >================== > >Please check ryu and switch version, and attached file. > > >> >> lab@lab-hackertools:~$ >> >> lab@lab-hackertools:~$ >> >> lab@lab-hackertools:~$ curl -X GET http://10.1.25.52:8080/stats/flow/9 >> >> {"9": []}lab@lab-hackertools:~$ >> >> >> >>========================================================================= >>=========== >> This message may contain information which is private, privileged or >>confidential of INNO-Tech Network & Service Inc. >> If you are not the intended recipient of this message, please notify >>the sender and destroy/delete the message. >> Any review, retransmission, dissemination or other use of, or taking of >>any action in reliance upon this information, >> by persons or entities other than the intended recipient is prohibited. >> >>========================================================================= >>=========== > ==================================================================================== This message may contain information which is private, privileged or confidential of INNO-Tech Network & Service Inc. If you are not the intended recipient of this message, please notify the sender and destroy/delete the message. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited. ==================================================================================== ------------------------------------------------------------------------------ _______________________________________________ Ryu-devel mailing list Ryu-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ryu-devel
