This Nicira extension field is VLAN VID+CFI+PCP.
OXM_OF_VLAN_VID and OXM_OF_VLAN_PCP should work fine in theory, but
in OvS it seems vlan_tci must be used to access the CFI bit from
NX_LEARN actions.
Signed-off-by: IWAMOTO Toshihiro <iwam...@valinux.co.jp>
---
ryu/ofproto/nicira_ext.py | 3 +++
1 file changed, 3 insertions(+)
diff --git a/ryu/ofproto/nicira_ext.py b/ryu/ofproto/nicira_ext.py
index e2fca47..ef44ccf 100644
--- a/ryu/ofproto/nicira_ext.py
+++ b/ryu/ofproto/nicira_ext.py
@@ -431,6 +431,8 @@ eth_src_nxm MAC address Ethernet source address.
eth_type_nxm Integer 16bit Ethernet type. Needed to support Nicira
extensions that require the eth_type to
be set. (i.e. tcp_flags_nxm)
+vlan_tci Integer 16bit VLAN TCI. Basically same as vlan_vid plus
+ vlan_pcp.
ip_proto_nxm Integer 8bit IP protocol. Needed to support Nicira
extensions that require the ip_proto to
be set. (i.e. tcp_flags_nxm)
@@ -482,6 +484,7 @@ oxm_types = [
oxm_fields.NiciraExtended0('eth_dst_nxm', 1, type_desc.MacAddr),
oxm_fields.NiciraExtended0('eth_src_nxm', 2, type_desc.MacAddr),
oxm_fields.NiciraExtended0('eth_type_nxm', 3, type_desc.Int2),
+ oxm_fields.NiciraExtended0('vlan_tci', 4, type_desc.Int2),
oxm_fields.NiciraExtended0('ip_proto_nxm', 6, type_desc.Int1),
oxm_fields.NiciraExtended1('tunnel_id_nxm', 16, type_desc.Int8),
oxm_fields.NiciraExtended1('tun_ipv4_src', 31, type_desc.IPv4Addr),
--
2.1.4
------------------------------------------------------------------------------
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
