I have tested with a physical OpenFlow Switch (Zodiac FX) and it seems that I have the same issue.
Does anyone know what could be the problem ? Carlos Ferreira On 19 October 2017 at 17:13, Carlos Ferreira <carlosmf...@gmail.com> wrote: > Hello to all > > When sending an OFPGroupMod message to OpenVSwitch, the switch is > returning an ErrorMessage with Bad Request and Bad Type. > I'm using OpenFlow13 for both ryu controller and openvswitch. > > > VENT ofp_event->ofctl_service EventOFPErrorMsg > EventOFPErrorMsg received. > version=0x4, msg_type=0x1, msg_len=0x1c, xid=0xb594f088 > `-- msg_type: OFPT_ERROR(1) > OFPErrorMsg(type=0x1, code=0x1, > data=b'\x04\x0f\x00\x10\xb5\x94\xf0\x88\x00\x02\x00\x00\xff\xff\xff\xfc') > |-- type: OFPET_BAD_REQUEST(1) > |-- code: OFPBRC_BAD_TYPE(1) > `-- data: version=0x4, msg_type=0xf, msg_len=0x10, xid=0xb594f088 > `-- msg_type: OFPT_GROUP_MOD(15) > > > > Does anyone know if there is any kind of issue with using GroupMod > messages with OpenVSwitch? > > > Thank you all! > Carlos Ferreira ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Ryu-devel mailing list Ryu-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ryu-devel