[EMAIL PROTECTED] wrote: > If I read your message correctly, you custom made the crossing! > Maybe you are an engineer after all ! I would not have the patience > to do this. I was anticipating that you had used an AF crossing or > an AM one. - Earl Henry,
Yes this is a custom built crossing (60 degrees +/- a degree or two). SHS has a 90 degree on the books. AM's crossings were not the correct angle. The 30 may have worked if I changed the track plan somewhat but I didn't have one available. I didn't really consider an AF diamond as I didn't have any and time was growing short. In fact I started the project before I had a confirmation to display the table. And here's a quick observation.... The table will 'shrink' to 4' X 4' X 7". It's foam insulation instead of plywood. But it's still heavy. If I find it's really unwieldy, I just may go to the multiple piece/clamp plan. Ken The poll results are in....... To REPLY to the list, use REPLY ALL, to reply to the sender, use REPLY. I do NOT know if this works on all e-mail software, but it works on some of the most common ones. For those of you on DIGEST mode, all REPLY messages go to the list. Change your membership, change your message settings, use our CALENDAR, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
